ISO 128

ISO 128 is an international standard (ISO), about the general principles of presentation in technical drawings, specifically the graphical representation of objects on technical drawings.[1]

Overview

Since 2003 the ISO 128 standard contains fifteen parts, which were initiated between 1996 and 2003. It starts with a summary of the general rules for the execution and structure of technical drawings. Further it describes basic conventions for lines, views, cuts and sections, and different types of engineering drawings, such as those for mechanical engineering, architecture, civil engineering, and shipbuilding. It is applicable to both manual and computer-based drawings, but it is not applicable to three-dimensional CAD models.[1]

The ISO 128 replaced the previous DIN 6 standard for drawings, projections and views, which was first published in 1922 and updated in 1950 and 1968. ISO 128 itself was first published in 1982, contained 15 pages and "specified the general principles of presentation to be applied to technical drawings following the orthographic projection methods".[2]

[3]

Several parts of this standard have been updated individually. The last parts and the standard as a whole were withdrawn by the ISO in 2001.

A thirteenth part was added in 2013.

Composition of ISO 128

The 7 parts of the ISO 128 standard are:

  • ISO 128-1:2020 Technical product documentation (TPD) — General principles of representation — Part 1: Introduction and fundamental requirements
  • ISO 128-2:2020 Technical product documentation (TPD) — General principles of representation — Part 2: Basic conventions for lines
  • ISO 128-3:2022 Technical product documentation (TPD) — General principles of representation — Part 3: Views, sections and cuts
  • ISO 128-15:2013 Technical product documentation (TPD) — General principles of presentation — Part 15: Presentation of shipbuilding drawings
  • ISO/TS 128-71:2010 Technical product documentation (TPD) — General principles of presentation — Part 71: Simplified representation for mechanical engineering drawings
  • ISO 128-100:2020 Technical product documentation — General principles of representation — Part 100: Index

Withdrawn parts

Replaced by ISO 128-2:2020
  • ISO 128-20:1996 Technical drawings — General principles of presentation — Part 20: Basic conventions for lines
  • ISO 128-21:1997 Technical drawings — General principles of presentation — Part 21: Preparation of lines by CAD systems
  • ISO 128-22:1999 Technical drawings — General principles of presentation — Part 22: Basic conventions and applications for leader lines and reference lines
  • ISO 128-23:1999 Technical drawings — General principles of presentation — Part 23: Lines on construction drawings
  • ISO 128-24:2014 Technical drawings — General principles of presentation — Part 24: Lines on mechanical engineering drawings
  • ISO 128-25:1999 Technical drawings — General principles of presentation — Part 25: Lines on shipbuilding drawings
Replaced by ISO 128-3:2022
  • ISO 128-30:2001 Technical drawings — General principles of presentation — Part 30: Basic conventions for views
  • ISO 128-33:2018 Technical product documentation (TPD) — General principles of presentation — Part 33: Representation of views, sections and cuts in construction drawings
  • ISO 128-34:2001 Technical drawings — General principles of presentation — Part 34: Views on mechanical engineering drawings
  • ISO 128-40:2001 Technical drawings — General principles of presentation — Part 40: Basic conventions for cuts and sections
  • ISO 128-43:2015 Technical product documentation (TPD) — General principles of presentation — Part 43: Projection methods in building drawings
  • ISO 128-44:2001 Technical drawings — General principles of presentation — Part 44: Sections on mechanical engineering drawings
  • ISO 128-50:2001 Technical drawings — General principles of presentation — Part 50: Basic conventions for representing areas on cuts and sections
A size chart illustrating the ISO A series described in ISO 216
  • ISO 129 Technical product documentation (TPD) — Presentation of dimensions and tolerances
    • ISO 129-1:2018 Technical product documentation (TPD) — Presentation of dimensions and tolerances — Part 1: General principles
    • ISO 129-4:2013 Technical product documentation (TPD) — Indication of dimensions and tolerances — Part 4: Dimensioning of shipbuilding drawings
    • ISO 129-5:2018 Technical product documentation — Indication of dimensions and tolerances — Part 5: Dimensioning of structural metal work
  • ISO 216 paper sizes, e.g. the A4 paper size
  • ISO 406:1987 Technical drawings — Tolerancing of linear and angular dimensions
  • ISO 1660:2017 Geometrical product specifications (GPS) — Geometrical tolerancing — Profile tolerancing
  • ISO 2203:1973 Technical drawings — Conventional representation of gears
  • ISO 3040:2016 Geometrical product specifications (GPS) — Dimensioning and tolerancing — Cones
  • ISO 3098-1:1974 Technical Drawing — Lettering — Part I: Currently Used Characters
  • ISO 4172:1991 Technical drawings — Construction drawings — Drawings for the assembly of prefabricated structures
  • ISO 5261:1995 Technical drawings — Simplified representation of bars and profile sections
  • ISO 5455:1979 Technical drawings — Scales
  • ISO 5456 Technical drawings — Projection methods
  • ISO 5457:1999 Technical product documentation — Sizes and layout of drawing sheets
  • ISO 5459:2011 Geometrical product specifications (GPS) — Geometrical tolerancing — Datums and datum systems
  • ISO 5845-1:1995 Technical drawings — Simplified representation of the assembly of parts with fasteners — Part 1: General principles
  • ISO 6410-1:1993 Technical drawings — Screw threads and threaded parts — Part 1: General conventions
  • ISO 6411:1982 Technical drawings — Simplified representation of centre holes
  • ISO 6412-1:2017 Technical product documentation — Simplified representation of pipelines — Part 1: General rules and orthogonal representation
  • ISO 6413:2018 Technical product documentation — Representation of splines and serrations
  • ISO 6414:2020 Technical product documentation (TPD) — Technical drawings for glassware
  • ISO 6428:1982 Technical drawings — Requirements for microcopying
  • ISO 6433:2012 Technical drawings — Part references
  • ISO 7083:1983 Technical drawings — Symbols for geometrical tolerancing — Proportions and dimensions
  • ISO 7200:2004 Technical product documentation — Data fields in title blocks and document headers
  • ISO 7437:1990 Technical drawings — Construction drawings — General rules for execution of production drawings for prefabricated structural components
  • ISO 7518:1983 Technical drawings — Construction drawings — Simplified representation of demolition and rebuilding
  • ISO 7519:1991 Technical drawings — Construction drawings — General principles of presentation for general arrangement and assembly drawings
  • ISO 8015:2011 Geometrical product specifications (GPS) — Fundamentals — Concepts, principles and rules
  • ISO 8048:1984 Technical drawings — Construction drawings — Representation of views, sections and cuts
  • ISO 8560:2019 Technical drawings — Construction drawings — Representation of modular sizes, lines and grids
  • ISO 8826-1:1989 Technical drawings — Rolling bearings — Part 1: General simplified representation
  • ISO 8826-2:1994 Technical drawings — Rolling bearings — Part 2: Detailed simplified representation
  • ISO 9222-1:1989 Technical drawings — Seals for dynamic application — Part 1: General simplified representation
  • ISO 9222-2:1989 Technical drawings — Seals for dynamic application — Part 2: Detailed simplified representation
  • ISO 9958-1:1992 Draughting media for technical drawings — Draughting film with polyester base — Part 1: Requirements and marking
  • ISO 9961:1992 Draughting media for technical drawings — Natural tracing paper
  • ISO 10209:2012 Technical product documentation — Vocabulary — Terms relating to technical drawings, product definition and related documentation
  • ISO 10579:2010 Geometrical product specifications (GPS) — Dimensioning and tolerancing — Non-rigid parts
  • ISO 13567 is an international Computer-aided design (CAD) layer standard.
  • ISO 13715:2017 Technical product documentation — Edges of undefined shape — Indication and dimensioning
  • ISO 15786:2008 Technical drawings — Simplified representation and dimensioning of holes

See also

References

  1. ^ a b ISO 128-1:2003 Abstract. Accessed 1 March 2009.
  2. ^ ISO 128 techstreet.com, 2009.) Archived 2019-10-17 at the Wayback Machine
  3. ^ ISO 128 (archive.org)

Read other articles:

Lancia TrikappaLa Lancia Trikappa carrozzata torpedoDescrizione generaleCostruttore Lancia Tipo principaleAutotelaio Produzionedal 1922 al 1925 Sostituisce laLancia Dikappa Sostituita daLancia Dilambda Esemplari prodotti847[senza fonte] Altre caratteristicheDimensioni e massaLunghezza4970 mm Larghezza1620 mm Passo3384 mm Massa1360 kg AltroStessa famigliaLancia Kappa NoteDati tecnici del telaio: a longheroni e traverse La Lancia Trikappa è un'automobile…

ХристианствоБиблия Ветхий Завет Новый Завет Евангелие Десять заповедей Нагорная проповедь Апокрифы Бог, Троица Бог Отец Иисус Христос Святой Дух История христианства Апостолы Хронология христианства Раннее христианство Гностическое христианство Вселенские соборы Ни…

Asha ParekhAsha Parekh pada 2018Lahir2 Oktober 1942 (umur 81)[1]PekerjaanAktrissutradaraproduserTahun aktif1952–1999Penghargaan Penghargaan Filmfare untuk Aktris Terbaik (1971) Penghargaan Prestasi Seumur Hidup Filmfare (2002) Penghargaan Kalakar (2018) PenghormatanPadma Shri (1992) Asha Parekh (kelahiran 2 Oktober 1942) adalah seorang aktris, sutradara, dan produser film asal India yang muncul pada banyak film yang sukses secara komersial sepanjang kariernya. Ia adalah aktri…

Baseball park in Fayetteville, North Carolina Not to be confused with Segra Park or Segra Field. Segra StadiumLocation460 Hay StreetFayetteville, North CarolinaUnited StatesCoordinates35°03′21″N 78°53′00″W / 35.055914°N 78.883382°W / 35.055914; -78.883382OwnerCity of FayettevilleOperatorCity of FayettevilleCapacity4,600[7]Field sizeLeft Field: 319 ft (97 m)Left-Center Field: 372 ft (113 m)Center Field: 400 ft (120 m)Right-…

  「俄亥俄」重定向至此。关于其他用法,请见「俄亥俄 (消歧义)」。 俄亥俄州 美國联邦州State of Ohio 州旗州徽綽號:七葉果之州地图中高亮部分为俄亥俄州坐标:38°27'N-41°58'N, 80°32'W-84°49'W国家 美國加入聯邦1803年3月1日,在1953年8月7日追溯頒定(第17个加入联邦)首府哥倫布(及最大城市)政府 • 州长(英语:List of Governors of {{{Name}}}]]) • …

Katedral Reims, tempat tradisional penobatan raja Prancis. Reims, atau Rheims, adalah kota di utara Prancis, 144 km timur laut Paris. Kota ini berada dalam wilayah régions Champagne-Ardenne. Menurut sensus 1999, penduduk kota berjumlah 187.206 di wilayah perkotaan, dan 291.735 di seluruh daerah metropolitannya. Sejarah kota Reims dapat ditelusuri hingga periode Kekaisaran Romawi. Kota ini, khususnya Katedral Reims, yang sempat rusak karena serangan Jerman pada Perang Dunia I, juga memiliki…

  「习壳郎」和「习氏甲虫」均重定向至此。关于此甲蟲所映射的對象,请见「习近平」。关于习近平的其它称呼,请见「對習近平的負面稱呼」。 習氏狼條脊甲 科学分类 界: 动物界 Animalia 门: 节肢动物门 Arthropoda 纲: 昆虫纲 Insecta 目: 鞘翅目 Coleoptera 科: 步行蟲科 Carabidae 属: 狼條脊甲屬 Rhyzodiastes 种: 習氏狼條脊甲 R. xii 二名法 Rhyzodiastes xiiC. B. Wang, 2016[1 …

Peta lokasi Munisipalitas Solrød Munisipalitas Solrød adalah munisipalitas (Denmark: kommune) di Region Sjælland di Denmark. Munisipalitas Solrød memiliki luas sebesar 40 km² dan memiliki populasi sebesar 20.759 jiwa. Referensi Municipal statistics: NetBorger Kommunefakta Diarsipkan 2007-08-12 di Wayback Machine., delivered from KMD aka Kommunedata (Municipal Data) Municipal merges and neighbors: Eniro new municipalities map Diarsipkan 2007-10-11 di Wayback Machine. lbsPemukiman di Den…

Mark David Chapman Mark David Chapman (Fort Worth, 10 maggio 1955) è un criminale statunitense, noto per aver ucciso, l'8 dicembre 1980, il cantautore John Lennon. Indice 1 Biografia 1.1 L'omicidio di John Lennon 1.2 Motivazioni e malattia mentale 2 Nella cultura di massa 3 Note 4 Bibliografia 5 Voci correlate 6 Altri progetti 7 Collegamenti esterni Biografia Questa voce o sezione sull'argomento criminali statunitensi non cita le fonti necessarie o quelle presenti sono insufficienti. Puoi …

Indonesian savoury snack made of glutinous rice For the German singer and actor, see Ute Lemper. LemperLemper wrapped in banana leavesTypeSnackPlace of originIndonesiaRegion or stateNationwideServing temperatureWarm or room temperatureMain ingredientsGlutinous rice; chicken, fish, abon (meat floss) or serundengVariationsSemar mendem  Media: Lemper Lemper is an Indonesian savoury snack made of glutinous rice filled with seasoned shredded chicken, fish abon (meat floss) or serundeng. The …

Geraniaceae Geranium dissectum Klasifikasi ilmiah Kerajaan: Plantae (tanpa takson): Tracheophyta (tanpa takson): Angiospermae (tanpa takson): Eudikotil (tanpa takson): Rosid Ordo: Geraniales Famili: GeraniaceaeJuss.[1] Genus tipe GeraniumL. Genus California Aldasoro et al.[2] Erodium Aiton Geranium L. Hypseocharis J. Remy Monsonia L. Pelargonium Aiton Geraniaceae adalah keluarga tumbuhan berbunga yang ditempatkan dalam ordo Geraniales. Nama keluarga ini berasal dari genus Geraniu…

Dudukan jamban adalah unit berengsel yang terdiri dari dudukan terbuka berbentuk bulat atau oval, dan biasanya penutup, yang dipasang pada mangkuk toilet yang digunakan dalam posisi duduk (berbeda dengan jamban jongkok ). Dudukannya bisa untuk jamban siram atau jamban kering . Dudukan jamban terdiri dari dudukannya sendiri, yang dapat dibentuk agar pengguna dapat duduk, dan penutupnya, yang menutupi jamban saat tidak digunakan – dalam beberapa kasus, penutupnya mungkin tidak ada, khususnya di …

Logo del videojuegoCall of Duty: Modern Warfare Información generalDesarrollador Infinity Ward[nb 1]​Distribuidor ActivisionEscritor Brian BloomJustin HarrisTaylor KurosakiBen ChaneyCompositor Sarah Schachner Datos del juegoGénero Disparos en primera personaAcciónIdiomas inglés y ruso Modos de juego Un jugador, multijugador y cooperativoClasificaciones ESRBPEGICEROUSKBBFCRARSGRACGSRRSMECCVDatos del softwareMotor IW engine Plataformas Microsoft WindowsPlayStation 4Xbox OnePlayStation 5X…

Indirect effects of the COVID-19 pandemic in the Republic of Ireland Part of a series on theCOVID-19 pandemicScientifically accurate atomic model of the external structure of SARS-CoV-2. Each ball is an atom. COVID-19 (disease) SARS-CoV-2 (virus) Cases Deaths Timeline 2019 2020 January responses February responses March responses April responses May responses June responses July responses August responses September responses October responses November responses December responses 2021 January re…

Norwegian historian, biographer and novelist Olav Njølstad Olav Njølstad (born 1 March 1957) is a Norwegian historian, biographer and novelist. He is director of the Norwegian Nobel Institute. Literary background As a novelist he made his literary debut in 2003 with the thriller Mannen med oksehjertet, and wrote the novel Brennofferet in 2005.[1] His biography of resistance leader, government minister and lawyer Jens Christian Hauge (Jens Chr. Hauge – fullt og helt from 2008) was…

يفتقر محتوى هذه المقالة إلى الاستشهاد بمصادر. فضلاً، ساهم في تطوير هذه المقالة من خلال إضافة مصادر موثوق بها. أي معلومات غير موثقة يمكن التشكيك بها وإزالتها. (مارس 2016) لنكسمعلومات عامةالتصنيف لغة برمجة ظهرت في 1984 التطويرالمطور جامعة ويسكونسن-ماديسون الإصدار الأول 1984 تعديل - …

2013 murder in North Attleborough, Massachusetts Murder of Odin LloydLloyd in an undated photoLocationNorth Attleborough, Massachusetts, U.S.DateJune 17, 2013 (2013-06-17)Attack typeMurder by shootingPerpetratorsAaron HernandezCarlos OrtizErnest WallaceCoronerMassachusetts Medical ExaminerVerdictHernandezGuilty on all countsWallaceNot guilty of first-degree murderGuilty of accessory to murder after-the-factOrtizPleaded guilty to accessory to murder after-the-fact (murder charge dr…

Questa voce sull'argomento stagioni delle società calcistiche italiane è solo un abbozzo. Contribuisci a migliorarla secondo le convenzioni di Wikipedia. Segui i suggerimenti del progetto di riferimento. Voce principale: Carrarese Calcio. Unione Sportiva Carrarese Pietrino BinelliStagione 1941-1942Sport calcio Squadra Carrarese P. Binelli Allenatore Imre Payer Presidente Francesco Biggi Serie C11º posto nel girone E. 1940-1941 1942-1943 Si invita a seguire il modello di voce Questa …

17Terbaik karya AudyDirilis6 Oktober 2017Direkam2002–2017GenrePopKronologi Audy Selalu Terdepan (2010)Selalu Terdepan2010 The Best of Audy: 17 (2017) The Best of Audy: 17 adalah album musik kompilasi karya Audy yang dirilis tahun 2017 berkaitan dengan 17 tahun Audy berkarier di dunia musik Indonesia. Album ini merupakan album kompilasi terbaik dari album-album sebelumnya, ditambah 2 lagu baru yang berjudul Tapi Aku dan Lelaki Sempurna.[1] Daftar lagu Lagu baru Tapi Aku - 4:00 Lela…

Football league seasonOB ISeason1959ChampionsSzolnok← 1958 1960 → 1959 Országos Bajnokság I (men's water polo) was the 53rd water polo championship in Hungary. There were ten teams who played two-round match for the title. Final list # Team M W D L G+ G− Diff Pts Notes Szolnoki Dózsa 18 15 2 1 84 39 +45 32 Champion Újpesti Dózsa 18 15 2 1 79 43 +36 32 Bp. Honvéd 18 11 3 4 66 48 +18 25 4 BVSC 18 9 3 6 87 74 +13 21 5 Ferencvárosi TC 18 4 9 5 53 60 −7 17 6 Újpesti Tungsram TE 18 5 4…