265 g (9.3 oz) (body only) 313 g (11.0 oz) (body, battery and SD memory card)
The Olympus PEN E-PL3 announced on 30 June 2011[1] is Olympus Corporation's seventh camera that adheres to the Micro Four Thirds (MFT) system design standard. The E-PL3 succeeds the Olympus PEN E-PL2, and was announced in concert with two other models, the Olympus PEN E-P3 (the flagship version), and the Olympus PEN E-PM1 (a new "Mini" version of the PEN camera line with similar features to the E-PL3). The E-PL3 is commonly said to be the "Lite" (less full featured) version of the E-P3, much as the E-PL1 and E-PL2 were "Lite" versions of the E-P1 and E-P2, respectively.
Technology
The E-PL3 addresses some of the concerns that critics had about previous PEN models: slow handling, due to slow autofocus speed and difficulty seeing the LCD panel under certain (e.g., bright, sunny) conditions.
The E-PL3 increases autofocus speed through use of a 120 Hz refresh rate for its sensor, similar to the technology used in the recently released Panasonic Lumix DMC-GH2 and G3 cameras. Olympus claims, based on in-house testing, that the E-PL3, along with its E-PM1 cousin, have similar characteristics to the flagship E-P3, which according to Olympus has the world's fastest autofocus speed of any camera as of the product announcement date.[2] The benefits of the 120 Hz refresh rate also provides the ability for continuous autofocus tracking during bursts of exposures, a faster shutter response (less lag) and less blackout time between exposures.
The E-PL3 lacks the E-P3 capacitive touchscreen for creative camera control, and the E-P3 OLED type display that is supposed to vastly improve performance in sunny conditions, and off-angle viewing. Instead, the E-PL3 has a tiltable LCD, which allows easy above the head, waist level, or low off the ground viewing. The E-PL3 continues with the proprietary Accessory Port, a power and communication port, which allows the use of various accessories, such as an external stereo microphone for HD video recording, LED macro lights, and a bluetooth communications adapter. The accessory port continues to be compatible with the high resolution, optional hotshoe mounted VF-2 electronic viewfinder (EVF).
The VF-2 had a flip angle eyepiece, allowing viewing from 0–90 degrees. The VF-2 had been criticized for being very expensive and for not having a locking device, with some users reporting easy dislodgement of the VF-2 from the hotshoe. To address these criticisms, in July 2011, Olympus announced the introduction of an optional VF-3 EVF, which has a lower resolution and a locking device.[citation needed]
Differences over Olympus PEN E-P1
Addition of an Accessory Port that can be used for an electronic viewfinder, external microphone or external flash
