|
Gémonval coal mines
The Gémonval coal mines are situated in eastern France, on the border between the departments of Haute-Saône and Doubs. The mines were operational for two distinct periods: the first between 1826 and 1847, following the granting of a concession, and the second in the 1940s by the Bureau of Geological and Geophysical Research (BRGG). These periods were interspersed with several attempts at revival. In the 1830s, the mine was subject to significant stock market speculation. The Gémonval keuper coal was used primarily for fueling boilers for concentrating brine from local saltworks, particularly at Mélecey, and for nearby forges. Additionally, the mines marketed pyrite from coal washing for the chemical industry. At the beginning of the 21st century, vestiges of this activity, including mine entrances, spoil heaps, and ruins, still exist. Location The Gémonval concession, encompassing 2,056 hectares, extends across the communes of Gémonval, Georfans, Courchaton, Vellechevreux, Marvelise, Saulnot, Crevans-et-la-Chapelle-lès-Granges, and Granges-le-Bourg. It is situated at the border of Haute-Saône and Doubs in the Bourgogne-Franche-Comté region.[1] The catchment area for the Gémonval coal mines encompasses the southern portion of the Lure arrondissement and the northern section of the Doubs region. The primary customers of the Gémonval mines are the saltworks, particularly that of Mélecey, local manufacturing facilities, and artisans in the region, most notably in Héricourt. The mines face direct competition from the Ronchamp mines and indirect competition from the Blanzy and Loire mines.[2] Geology The coal and halite deposits that have been exploited are found within the Haute-Saône keuper coal basin, which is composed of alternating layers of sandstone, variegated marl, and gypsum dolomite. The Gémonval deposit is divided by a fault.[3] The quality of the coal at Gémonval is notably poor, with a sulfur content that is so high that it can ignite if left in piles for several weeks. The layer averages 0.80 meters in thickness.[4] However, local mines are rich in gypsum, pyrite, rock salt, and iron ore.[5]
History First period of operationThe Gémonval concession was bestowed upon Samuel Blum, proprietor of the forges of Pont-sur-l'Ognon, by a royal ordinance on October 8, 1826.[1][6] Blum utilized the coal directly for the operation of his factory.[7] In the 1830s, the operating company engaged in considerable stock market speculation regarding this mine. They asserted that they were exploiting two seams of coal, each one meter thick, of impeccable quality and continually announced discoveries. However, despite these claims, no profit was generated. To achieve a profit margin of 17 to 18%, production would have needed to reach 500 to 600 tons per day, which would have been equivalent to Alsace's consumption at that time. However, production never exceeded 20 tons per day. At that time, eight shafts were in operation, and two steam engines were in service.[5] In 1832, several exploratory shafts were dug in the municipality of Vellechevreux. The majority of these shafts identified multiple coal seams, including a first seam of 10 cm of carbonaceous shale, a second of 46 cm of high-quality coal, a third of 61 cm of coal intermingled with shale, and a fourth of an unidentified composition. On August 18 of the same year, a shaft measuring 19.5 meters in depth was excavated in Courchaton. This was part of a group of three exploratory shafts dug by the Gémonval mines in the area. On November 10, 1833, the thickness of the seam encountered exhibited variability, ranging from 5 to 10 cm, as the galleries were excavated.[3] Two additional boreholes and two shafts were constructed in the same area.[8] By 1842, the company, owned by Boisson Faucompré & Co., employed a workforce of 72 individuals, utilized two steam engines, and employed two winding machines.[9] The mines were initially subjected to closure in 1847.[1] Abandonment and research periodFrom 1850 to 1905, many unsuccessful attempts were made to revive the project. In 1850, a drilling operation discovered coal at a depth of 90 meters.[10] By 1866, the concession had been acquired by Mr. Lorain of Dijon.[11] The concession was formally relinquished on December 10, 1878.[6] In approximately 1880, two drilling operations were conducted, followed by another by Gouhenans saltworks in July 1905, which identified the presence of coal at depths ranging from 81.25 to 81.80 meters.[3] Second period of operationIn response to wartime shortages, the BRGG conducted new searches between 1942 and 1944, circumventing occupant quotas.[12] The Vy-lès-Lure concession was reopened, but the Corcelles concession was not. In the 1940s, the staff included a mining engineer, a clerk, a domestic worker, a master miner, three miners, five rollers, four laborers, two machinists, two firemen, a carpenter, and a blacksmith with an assistant, and seven washers (two for coal, five for pyrite). The coal was sorted and underwent a series of washes to separate pyrite,[13] which was subsequently utilized by a chemical company, "La Chemiquerie."[3] For each hectoliter of raw product, the washing process yielded 70 liters of washed coal for local sale, 7 kg of pyrite, and 13 liters of small coal for steam engines.[13] The issue of water infiltration has been a persistent challenge at Gémonval. At the Fourneau shaft, the volume of water infiltration ranges from 150 cubic meters per day during the summer months to 200 m3 per day during the winter. The water is managed through an 8 m3 reservoir carved into the gypsum. The water is then brought to the surface by a plunger pump powered by a single-action, direct-drive steam engine, capable of lifting up to 85 liters per piston stroke and 500 m3 per day.[13] OperationsHouillère shaft47°32′18″N 6°34′57″E / 47.53833°N 6.58250°E The Houillère shaft represents a primary component of the concessionary infrastructure, with a network of associated numbered shafts and drills in its immediate vicinity. It is connected to the Essarts and Fourneau shafts. In the early 21st century, a substantial spoil heap remains visible at the site.[3][14]
Shaft No. 1In 1834, the initial excavation, designated Shaft No. 1, encountered a layer of considerable thickness, measuring one meter in width, at a depth of 60.60 meters.[3][14] Shaft No. 2In 1833, Shaft No. 2 encountered a 0.55-meter layer at a depth of 15 meters.[3][14] Shaft No. 3In 1835, Shaft No. 3 encountered a 0.40-meter-thick layer of soft, non-sticky coal at a depth of 21.60 meters.[3][14] This was followed by the deepening of the shaft to reach a gypsum layer at 30 meters. Subsequently, a rising crosscut was dug, which intersected a water source upon exiting the gypsum.[15]  Geological section of Gémonval No. 3 shaft. h.t. soft coal, h.g. (gray): gypsum coal Shaft No. 4In 1834, Shaft No. 4 reached a one-meter layer at 60.60 meters. The coal was found to be lean, non-sticky, shaly, and pyritic.[3][14] Époisses ShaftThe shaft, measuring 28 meters in length, is believed to have been constructed in 1855.[16] Moulin GalleryThe 130-meter Moulin Gallery extends in a westerly direction until it reaches the Houillère shaft.[3][14][16] Essarts Shaft47°32′07″N 6°35′27″E / 47.53528°N 6.59083°E Situated on the Gémonval-Crevans road, it was the sole operational shaft in 1854. Coal was extracted at a depth of 37 meters and transported via a nearby stream. By 1943, debris had accumulated along the stream, and a partially destroyed shaft building remained.[3][14][17] The remains of the spoil heap and steam engine are still visible in the early 21st century.
Fourneau shaftA 0.80-meter layer was encountered at a depth of 40 meters in the fourneau shaft. The presence of a mining building, spoil heap, and gallery entrance within a radius of 100 meters indicates that the shaft was still operational in 1944, with three work sites in operation at that time.[3][14] Isaac shaftIsaac shaft was backfilled before 1943 without leaving debris.[3][14] Elizabeth shaft47°32′19″N 6°35′49″E / 47.53861°N 6.59694°E The Elizabeth Shaft is 70 meters deep,[18] with the presence of a spoil heap and a sinkhole serving to demarcate its location in the early 21st century.
Production The Gémonval operation is subdivided into two distinct work compartments, separated by a fault.[3][14]
The Houillère shaft is the sole mine that traverses both compartments. In 1838, 600 tons of low-ash coal from the Corcelles and Gémonval concessions were consumed in the Doubs region.[19] The mean annual production volume for the mid-19th century was 8,000 m3.[11]
See alsoReferences
Gémonval coal mines at Wikipedia's sister projects
Bibliography
|
Portal di Ensiklopedia Dunia
