|
BMW S85
The BMW S85B50 is a naturally aspirated V10 petrol engine which replaced the BMW S62 V8 engine in the M5 model and was produced from 2005–2010. It was both BMW's first and only production V10 engine, and the first petrol V10 engine to be available in a production sedan (saloon). Introduced in the E60 M5, the S85B50 was inspired by BMW's previous Formula One involvement.[1] Unlike most other BMW M engines, the S85 is not related to a regular production BMW engine.[2] The BMW S65 V8 engine (used in the E92 M3) is based on the S85. NomenclatureAs the S85 was BMW's first V10 engine, it was given a new series in the BMW's engine codes. The "60s" were used for V8 engines and the "70s" were used for V12 engines, therefore the V10 was allocated in the "80s" (despite having fewer cylinders than the V12 engines in the "70s".) The engine code for the related BMW S65 V8 engine reflects its link to the S85. The S65 code was selected to signify that the V8 is largely derived from the S85 minus two cylinders, and not related to BMW's other V8s.[3] Design
The S85 has dual overhead camshafts with four valves per cylinder and double-VANOS (variable valve timing).[4] The engine block and cylinder head are constructed from aluminum alloy.[5] Peak power is 373 kW (507 PS; 500 hp) at 7,750 rpm and peak torque is 520 N⋅m (384 lb⋅ft) at 6,100 rpm.[6] The redline is 8,250 rpm,[2] and the specific output of 74.6 kW (100.0 bhp) per litre is amongst the highest of naturally aspirated production car engines. Features include:
ReliabilityA well-known problem with the S85 is premature rod bearing wear, which can occur around 80,000 km or roughly 50,000 miles. The root cause is attributed to the engine’s high-revving nature, tight tolerances and a lack of clearance between the rod bearings and the rod journals. The S85 operates at very high RPMs (up to 8,250 RPM), and the lack of sufficient lubrication combined with high pressures leads to increased wear on the bearings, potentially resulting in catastrophic engine failure if not replaced preemptively. The original maintenance intervals for oil changes were too long for these conditions, exacerbating the issue. Hence, replacement of rod bearings preemptively as part of preventive maintenance and shortening oil change intervals are paramount to engine longevity. [13][14] Another common issue involves the VANOS system, which controls the variable valve timing. The VANOS solenoids and high-pressure oil lines can degrade over time, leading to erratic performance or engine fault codes. The complexity of the system, combined with high oil temperatures, can cause these components to fail prematurely.[15] Throttle actuator failures are also a known problem. These actuators control the throttle response in the S85’s individual throttle bodies. Over time, the gears within the actuators wear down, leading to a loss of throttle control or limp mode. This issue is particularly problematic due to the engine’s dependence on precise throttle control for its high-performance output.[13][16] AwardsThe S85 has won the following awards at the International Engine of the Year:[17]
Applications
References
|
||||||||||||||||||||||||||||||||||||||||||||||||||||
Portal di Ensiklopedia Dunia
