ABSTRACT Construction hauling road at the swampy area is very difficult due to weak materials and soft material for the basement. The problem can be determinate with approaching density of material during to reach optimum compaction. To determination optimum compaction can be use wet and dry density method and optimum water content. Laboratory testing at the laboratory is conducted on 95% of compaction include moisture content (ASTM D 2216-80), Specific Gravity (ASTM D 854-23), Attenberg Limit (ASTM D 422-63), Liquid Limit (ASTM D 427), compaction (ASTM D 1557). Field testing is required to compare actual value of basic properties of material and laboratory test and also to get correlation number of compaction with thick of layering material. The result of the study is increasing dry density will be give impact reducing void ratio and porosity. Highest density values have been found at the laterite material (coarse) with density number up to 2.18gr/cm3 during wet condition and during dry condition 1.98 gr/cm3. Highest number of wet density fine material about 2.12gr/cm3 and 1.87gr/cm3 for dry density. Lowest number of density for coarse material about 1.82gr/cm3 (wet) and 1.46gr/cm3 (dry) while for fine material about 1.83gr/cm3 (wet) and 1.55gr/cm3. Construction hauling road at the soft material can be conducted using selective material and keep optimum water content and applying compaction layer by layer to reach optimum compaction.
| Published by | Institut Teknologi Nasional Yogyakarta |
| Journal Name | JURNAL TEKNOLOGI TECHNOSCIENTIA |
| Contact Phone | +62274-544504 |
| Contact Name | bernadeta subandini astuti |
| Contact Email | bernadeta.palguno@gmail.com |
| Location | Kab. sleman, Daerah istimewa yogyakarta INDONESIA |
| Website | technoscientia| https://ejournal.akprind.ac.id/index.php/technoscientia| |
| ISSN | ISSN : 19798415, EISSN : 27148025, DOI : https://doi.org/10.34151/technoscientia.v8i2.161, |
| Core Subject | Science, Engineering, |
| Meta Subject | Earth & Planetary Sciences, Engineering, |
| Meta Desc | JURNAL TEKNOLOGI TECHNOSCIENTIA dengan ISSN: 1979-8415 dan E-ISSN: 2714-8025 merupakan jurnal ilmiah yang diterbitkan LPPM Institut Sains & Teknologi AKPRIND Yogyakarta sebagai wahana publikasi karya ilmiah/penelitian di bidang teknologi atau rekayasa meliputi bidang teknik kimia, teknik industri, teknik mesin, teknik elektro, teknik informatika, teknik geologi, dan teknik lingkungan, terbit dua kali setahun pada setiap bulan Februari dan Agustus. Setiap naskah yang dikirim akan dilakukan review secara tertutup. Hasil review naskah meliputi: DITOLAK atau DITERIMA DENGAN PERBAIKAN atau DITERIMA. Setiap naskah yang dinyatakan DIITERIMA dan DITERBITKAN dikenakan biaya proses dan cetak sebesar Rp. 250.000,- (di luar biaya pengiriman) dikirimkan via transfer ke: Bank Mandiri Cabang Yogyakarta No.: 137-00-1255210-1 an.: Prof. Dr. Ir. Sudarsono, M.T. |
| Penulis | -, SUPANDI |
| Publisher Article | Lembaga Penelitian & Pengabdian Kepada Masyarakat (LPPM), IST AKPRIND Yogyakarta |
| Subtitle Article | JURNAL TEKNOLOGI TECHNOSCIENTIA Technoscientia Vol 8 No 1 Agustus 2015 |
| Scholar Google | http://scholar.google.com/scholar?q=%2Bintitle%3A&… |
| View Article | https://ejournal.akprind.ac.id… |
| DOI | https://doi.org/10.34151/technoscie… |
| DOI Number | DOI: 10.34151/technoscientia.v8i1.192 |
| Download Article [1] | https://ejournal.akprind.ac.id/index.php… |
| Download Article [2] |
Informasi yang terkait dengan QUALITY CONTROL KEPADATAN OPTIMUM TIMBUNAN BERDASARKAN FAKTOR DENSITAS DALAM PEMBENTUKAN JALAN PENGANGKUTAN BATUBARA
Universitas Quality Skytrax Quality approved Airlines ™ Universitas Quality Berastagi Quality Street (film 1927) Gugus mutu Mutu layanan Pengendalian mutu Grand Q Hotel Gorontalo Manajemen kualitas total Manajemen mutu Delapan langkah gugus mutu Bilangan setana Charlotte Roval 400