Perseverance,[2] is a car-sized Mars rover designed to explore the Jezero crater on Mars as part of NASA's Mars 2020 mission. It was manufactured by the Jet Propulsion Laboratory and launched on July 30, 2020, at 11:50 UTC.[3] Confirmation that the rover successfully landed on Mars was received on February 18, 2021, at 20:55 UTC.[4][5] As of 21 December 2024, Perseverance has been active on Mars for 1364 sols (1,402 Earth days, or 3 years, 10 months and 3 days) since its landing. Following the rover's arrival, NASA named the landing site Octavia E. Butler Landing.[6][7]
Perseverance has a similar design to its predecessor rover, Curiosity, although it was moderately upgraded. It carries seven primary payload instruments, nineteen cameras, and two microphones.[8]
The rover also carried the mini-helicopter Ingenuity to Mars, an experimental technology testbed that made the first powered aircraft flight on another planet on April 19, 2021.[9] On January 18, 2024 (UTC), it made its 72nd and final flight, suffering damage on landing to its rotor blades, possibly all four, causing NASA to retire it.[10][11]
The rover's goals include identifying ancient Martian environments capable of supporting life, seeking out evidence of former microbial life existing in those environments, collecting rock and soil samples to store on the Martian surface, and testing oxygen production from the Martian atmosphere to prepare for future crewed missions.[12]
Mission
Despite the high-profile success of the Curiosity rover landing in August 2012, NASA's Mars Exploration Program was in a state of uncertainty in the early 2010s. Budget cuts forced NASA to pull out of a planned collaboration with the European Space Agency which included a rover mission.[13] By the summer of 2012, a program that had been launching a mission to Mars every two years suddenly found itself with no missions approved after 2013.[14]
In 2011, the Planetary Science Decadal Survey, a report from the National Academies of Sciences, Engineering, and Medicine containing an influential set of recommendations made by the planetary science community, stated that the top priority of NASA's planetary exploration program in the decade between 2013 and 2022 should be to begin a NASA-ESA Mars Sample Return campaign, a four-mission project to cache, retrieve, launch, and safely return samples of the Martian surface to Earth. The report stated that NASA should invest in a sample-caching rover as the first step in this effort, with the goal of keeping costs under US$2.5 billion.[15]
After the success of the Curiosity rover and in response to the recommendations of the decadal survey, NASA announced its intent to launch a new Mars rover mission by 2020 at the American Geophysical Union conference in December 2012.[16]
Though initially hesitant to commit to an ambitious sample-caching capability (and subsequent follow-on missions), a NASA-convened science definition team for the Mars 2020 project released a report in July 2013 that the mission should "select and store a compelling suite of samples in a returnable cache."[17]
Looking for habitability: identify past environments that were capable of supporting microbial life.
Seeking biosignatures: seek signs of possible past microbial life in those habitable environments, particularly in specific rock types known to preserve signs over time.
Caching samples: collect core rock and regolith (unconsolidated and loose "soil") samples and store them within the rover and on the Martian surface (as a backup) for delivery to a future sample return rocket.[19]
In the first science campaign Perseverance performs an arching drive southward from its landing site to the Séítah unit to perform a "toe dip" into the unit to collect remote-sensing measurements of geologic targets. After that it will return to the Crater Floor Fractured Rough to collect the first core sample there. Passing by the Octavia E. Butler landing site concludes the first science campaign.
The second campaign will include several months of travel towards the "Three Forks" where Perseverance can access geologic locations at the base of the ancient delta of Neretva river, as well as ascend the delta by driving up a valley wall to the northwest.[20]
The Perseverance design evolved from its predecessor, the Curiosity rover. The two rovers share a similar body plan, landing system, cruise stage, and power system, but the design was improved in several ways for Perseverance. Engineers designed the rover wheels to be more robust than Curiosity's wheels, which had sustained some damage.[21]Perseverance has thicker, more durable aluminum wheels, with reduced width and a greater diameter, 52.5 cm (20.7 in), than Curiosity's 50 cm (20 in) wheels.[22][23] The aluminum wheels are covered with cleats for traction and curved titanium spokes for springy support.[24] The heat shield for the rover was made out of phenolic-impregnated carbon ablator (PICA), to allow it to withstand up to 2,400 °F (1,320 °C) of heat.[25] Like Curiosity, the rover includes a robotic arm, although Perseverance's arm is longer and stronger, measuring 2.1 m (6 ft 11 in). The arm hosts an elaborate rock-coring and sampling mechanism to store geologic samples from the Martian surface in sterile caching tubes.[26] There is also a secondary arm hidden below the rover that helps store the chalk-sized samples. This arm is known as the Sample Handling Assembly (SHA), and is responsible for moving the soil samples to various stations within the Adaptive Caching Assembly (ACA) on the underside of the rover. These stations include volume assessment (measuring the length of sample), imaging, seal dispensing, and hermetic seal station, among others.[27] Owing to the small space in which the SHA must operate, as well as load requirements during sealing activities, the Sample Caching System "is the most complicated, most sophisticated mechanism that we have ever built, tested and readied for spaceflight."[28]
The combination of larger instruments, new sampling and caching system, and modified wheels makes Perseverance heavier, weighing 1,025 kg (2,260 lb) compared to Curiosity at 899 kg (1,982 lb)—a 14% increase.[30]
The rover's computer uses the BAE Systems RAD750radiation-hardened single board computer based on a ruggedized PowerPC G3 microprocessor (PowerPC 750). The computer contains 128 megabytes of volatile DRAM, and runs at 133 MHz. The flight software runs on the VxWorksoperating system, is written in C and is able to access 4 gigabytes of NAND non-volatile memory on a separate card.[32]Perseverance relies on three antennas for telemetry, all of which are relayed through craft currently in orbit around Mars. The primary UHF antenna can send data from the rover at a maximum rate of two megabits per second.[33] Two slower X-band antennas provide communications redundancy.
NASA considered nearly 60 proposals[35][36] for rover instrumentation. On July 31, 2014, NASA announced the seven instruments that would make up the payload for the rover:[37][38]
Mars Oxygen ISRU Experiment (MOXIE), an exploration technology investigation to produce a small amount of oxygen (O2) from Martian atmospheric carbon dioxide (CO2). On April 20, 2021, 5.37 grams of oxygen were produced in an hour, with nine more extractions planned over the course of two Earth years to further investigate the instrument.[39] This technology could be scaled up in the future for human life support or to make the rocket fuel for return missions.[40][41]
SuperCam, an instrument suite that can provide imaging, chemical composition analysis, and mineralogy in rocks and regolith from a distance. It is an upgraded version of the ChemCam on the Curiosity rover but with two lasers and four spectrometers that will allow it to remotely identify biosignatures and assess the past habitability. SuperCam is used in conjunction with the AEGIS targeting system. Los Alamos National Laboratory, the Research Institute in Astrophysics and Planetology (IRAP) in France, the French Space Agency (CNES), the University of Hawaii, and the University of Valladolid in Spain cooperated in the SuperCam's development and manufacture.[50][51]
Mastcam-Z, a stereoscopic imaging system with the ability to zoom.[52][53] Many photos were included in the published NASA photogallery. (Including Raw)
There are additional cameras and two audio microphones (the first working microphones on Mars), that will be used for engineering support during landing,[56] driving, and collecting samples.[57][58] For a full look at Perseverance's components see Learn About the Rover.
Scientific instruments diagram
Cameras documenting the descent and landing
Cameras onboard the rover
Mars Ingenuity helicopter experiment
The Ingenuity helicopter, powered by solar-charged batteries, was sent to Mars in the same bundle with Perseverance. With a mass of 1.8 kg (4.0 lb), the helicopter demonstrated the reality of flight in the rarefied Martian atmosphere and the potential usefulness of aerial scouting for rover missions. It carried two cameras but no scientific instruments[59][60][61] and communicated with Earth via a base station onboard Perseverance.[62] Its pre-launch experimental test plan was three flights in 45 days, but it far exceeded expectations and made 72 flights in nearly three years. After its first few flights, it made incrementally more ambitious ones, several of which were recorded by Perseverance's cameras. The first flight was April 19, 2021, at 07:15 UTC, with confirmation from data reception at 10:15 UTC.[63][64][65][66][67] It was the first powered flight by any aircraft on another planet.[9] On January 18, 2024 (UTC), it made its 72nd and final flight, suffering the loss of a rotor blade (imaged, by Perseverance, lying on the sand roughly 15 m (49 ft) distant from the upright body of Ingenuity), causing NASA to retire it.[10][68]
Location of the base radio station at Perseverance
Antenna for Ingenuity on Perseverance (view from top)
Antenna for Ingenuity and the Sky camera of Perseverance
Ingenuity helicopter deployed on the Martian surface
Ingenuity, days after its final Mars flight, with missing and damaged blades
Name
NASA's Thomas Zurbuchen announced the rover's official name, Perseverance, on March 5, 2020, at Lake Braddock Secondary School in Burke, Virginia. Zurbuchen made the final selection following a 2019 nationwide naming contest that drew more than 28,000 essays by K-12 students from every U.S. state and territory.
Curiosity. InSight. Spirit. Opportunity. If you think about it, all of these names of past Mars rovers are qualities we possess as humans. We are always curious, and seek opportunity. We have the spirit and insight to explore the Moon, Mars, and beyond. But, if rovers are to be the qualities of us as a race, we missed the most important thing. Perseverance. We as humans evolved as creatures who could learn to adapt to any situation, no matter how harsh. We are a species of explorers, and we will meet many setbacks on the way to Mars. However, we can persevere. We, not as a nation but as humans, will not give up. The human race will always persevere into the future.[69]
Twin rover
The full-scale twin engineering model of Perseverance, the OPTIMISM rover is used at the JPL Mars Yard for testing procedures and solving problems[a]
JPL built a copy of the Perseverance; a twin rover used for testing and problem solving, OPTIMISM (Operational Perseverance Twin for Integration of Mechanisms and Instruments Sent to Mars), a vehicle system test bed (VSTB). It is housed at the JPL Mars Yard and is used to test operational procedures and to aid in problem solving should any issues arise with Perseverance.[70]
The rover took 29 weeks to travel to Mars and made its landing in Jezero Crater on February 18, 2021, to begin its science phase.[72]
After May 17, 2022, the rover will move uphill and examine rocks on the surface for evidence of past life on Mars. On its return downhill, it will collect sample rocks to be retrieved and examined by future expeditions.[73]
Landing
The 6-m crater created with the impact of the 77-kg tungsten cruise mass balance device released during the EDL stage on February 18, 2021
The landing site and the spacecraft debris (February 2021)
The successful landing of Perseverance in Jezero Crater was announced at 20:55 UTC on February 18, 2021,[4] the signal from Mars taking 11 minutes to arrive at Earth. The rover touched down at 18°26′41″N77°27′03″E / 18.4446°N 77.4509°E / 18.4446; 77.4509,[74] roughly 1 km (0.62 mi) southeast of the center of its 7.7 km × 6.6 km (4.8 mi × 4.1 mi)[75] wide landing ellipse. It came down pointed almost directly to the southeast,[76] with the RTG on the back of the vehicle pointing northwest. The descent stage ("sky crane"), parachute and heat shield all came to rest within 1.5 km of the rover (see satellite image). Having come within sixteen feet (~5 meters) of its target,[which?] the landing was more accurate than any previous Mars landing; a feat enabled by the experience gained from Curiosity's landing and the use of new steering technology.[75]
One such new technology is Terrain Relative Navigation (TRN), a technique in which the rover compares images of the surface taken during its descent with reference maps, allowing it to make last minute adjustments to its course. The rover also uses the images to select a safe landing site at the last minute, allowing it to land in relatively unhazardous terrain. This enables it to land much closer to its science objectives than previous missions, which all had to use a landing ellipse devoid of hazards.[75]
The landing occurred in the late afternoon, with the first images taken at 15:53:58 on the mission clock (local mean solar time).[77] The landing took place shortly after Mars passed through its northern vernal equinox (Ls = 5.2°), at the start of the astronomical spring, the equivalent of the end of March on Earth.[78]
Jezero Crater is a paleolake basin.[80][81] It was selected as the landing site for this mission in part because paleolake basins tend to contain perchlorates.[80][81] Astrobiologist Dr. Kennda Lynch's work in analog environments on Earth suggests that the composition of the crater, including the bottomset deposits accumulated from three different sources in the area, is a likely place to discover evidence of perchlorate-reducing microbes, if such bacteria are living or were formerly living on Mars.[80][81]
Video of Perseverance's parachute deployment and powered landing sequence
An illustration of Perseverance tethered to the sky crane.
The rover photographed from the sky crane during descent
A few days after landing, Perseverance released the first audio recorded on the surface of Mars, capturing the sound of Martian wind.[82][83]
During its travels on Mars, NASA scientists had observed around Sol 341 (February 4, 2022) that a small rock had dropped into one of its wheels while the rover was studying the Máaz rock formation. The rock was visible from one of the hazard avoidance cameras, and was determined not to be harmful to the rover's mission. The rock has since stayed on Perseverance's wheel for around 427 sols (439 days) as the rover traveled over 6 miles (9.7 km) on the martian surface. NASA deemed that Perseverance had adopted a pet rock for its journey.[84][85][86] Later, by May 2024, the rover picked up another pet rock named "Dwayne".[87]
Traverse
Total tracks of Ingenuity and Perseverance November 10, 2023 [88]
It is planned for Perseverance to visit the bottom and upper parts of the 3.4 to 3.8 billion-year-old Neretva Vallis delta, the smooth and etched parts of the Jezero Crater floor deposits interpreted as volcanic ash or aeolian airfall deposits, emplaced before the formation of the delta; the ancient shoreline covered with Transverse Aeolian Ridges (dunes) and mass wasting deposits, and finally, it is planned to climb onto the Jezero Crater rim.[89]
In its progressive commissioning and tests, Perseverance made its first test drive on Mars on March 4, 2021. NASA released photographs of the rover's first wheel tracks on the Martian soil.[90]
Perseverance's first test drive (March 4, 2021)
Rover's first wheel tracks
Rover's first test drive
Rocket scour and tracks
Samples cached for the Mars sample-return mission
Perseverance rover's sampling bits
The pointed one with two windows on the left is the regolith drill
the two shorter ones on the right are abrasion tools
the others in the center are rock drills
Mapping Perseverance's samples collected to date (The 10 duplicate samples to be left behind at Three Forks Sample Depot are framed in green colour.)
In support of the NASA-ESA Mars Sample Return, rock, regolith (Martian soil), and atmosphere samples are being cached by Perseverance. As of October 2023, 27 out of 43 sample tubes have been filled,[91] including 8 igneous rock samples, 12 sedimentary rock sample tubes, a Silica-cementedcarbonate rock sample tube,[92] two regolith sample tubes, an atmosphere sample tube,[93] and three witness tubes.[94] Before launch, 5 of the 43 tubes were designated "witness tubes" and filled with materials that would capture particulates in the ambient environment of Mars. Out of 43 tubes, 3 witness sample tubes will not be returned to Earth and will remain on rover as the sample canister will only have 30 tube slots. Further, 10 of the 43 tubes are left as backups at the Three Forks Sample Depot.[95]
Discoveries
In July 2024, NASA’s Perseverance rover discovered “leopard spots” on a reddish rock nicknamed "Cheyava Falls" in Mars’ Jezero Crater, that has some indications it may have hosted microbial life billions of years ago, but further research is needed.[96][97]
Cost
NASA plans to invest roughly US$2.75 billion in the project over 11 years, including US$2.2 billion for the development and building of the hardware, US$243 million for launch services, and US$291 million for 2.5 years of mission operations.[8][98]
Adjusted for inflation, Perseverance is NASA's sixth-most expensive robotic planetary mission, though it is cheaper than its predecessor, Curiosity.[99]Perseverance benefited from spare hardware and "build-to print" designs from the Curiosity mission, which helped reduce development costs and saved "probably tens of millions, if not 100 million dollars" according to Mars 2020 Deputy Chief Engineer Keith Comeaux.[100]
Commemorative artifacts
"Send Your Name to Mars"
NASA's "Send Your Name to Mars" campaign invited people from around the world to submit their names to travel aboard the agency's next rover to Mars. 10,932,295 names were submitted. The names were etched by an electron beam onto three fingernail-sized silicon chips, along with the essays of the 155 finalists in NASA's "Name the Rover" contest. The three chips share space on an anodized plate with a laser engraved graphic representing Earth, Mars, and the Sun. The rays emanating from the Sun contain the phrase "Explore As One" written in Morse code.[101] The plate was then mounted on the rover on March 26, 2020.[102]
"Send Your Name to Mars" campaign of Mars 2020 [29]
"Send Your Name" placard on the Perseverance rover on Earth (March 26, 2020)
A sample of a souvenir boarding pass for those who registered their names to be flown aboard the Perseverance rover as part of the "Send Your Name to Mars" campaign.
"Send Your Name" placard now on Mars (February 28, 2021)
Geocaching in Space Trackable
SHERLOC's calibration target aboard the Perseverance Mars rover with Mars Meteorite in the center of the top row
Part of Perseverance's cargo is a geocaching trackable item viewable with the SHERLOC's WATSON camera.[103]
In 2016, NASA SHERLOC co-investigator Dr. Marc Fries — with help from his son Wyatt — was inspired by Geocaching's 2008 placement of a cache on the International Space Station to set out and try something similar with the rover mission. After floating the idea around mission management, it eventually reached NASA scientist Francis McCubbin, who would join the SHERLOC instrument team as a collaborator to move the project forward. The Geocaching inclusion was scaled-down to a trackable item that players could search for from NASA camera views and then log on to the site.[104] In a manner similar to the "Send Your Name to Mars" campaign, the geocaching trackable code was carefully printed on a one-inch, polycarbonate glass disk serving as part of the rover's calibration target. It will serve as an optical target for the WATSON imager and a spectroscopic standard for the SHERLOC instrument. The disk is made of a prototype astronaut helmet visor material that will be tested for its potential use in crewed missions to Mars. Designs were approved by the mission leads at NASA's Jet Propulsion Laboratory (JPL), NASA Public Affairs, and NASA HQ, in addition to Groundspeak Geocaching HQ.[105][106]
Tribute to healthcare workers
Tribute to Healthcare Workers plate seen before being attached to the rover.[29]
Perseverance launched during the COVID-19 pandemic, which began to affect the mission planning in March 2020. To show appreciation for healthcare workers who helped during the pandemic, an 8 cm × 13 cm (3.1 in × 5.1 in) plate with a staff-and-serpent symbol (a Greek symbol of medicine) was placed on the rover. The project manager, Matt Wallace, said he hoped that future generations going to Mars would be able to appreciate healthcare workers during 2020.[107]
Family portrait of NASA Mars rovers
One of the external plates of Perseverance includes a simplified representation of all previous NASA Martian rovers, Sojourner, Spirit, Opportunity, Curiosity, as well as Perseverance and Ingenuity, similar to the trend of automobile window decals used to show a family's makeup.[108]
The orange-and-white parachute used to land the rover on Mars contained a coded message that was deciphered by Twitter users. NASA's systems engineer Ian Clark used binary code to hide the message "dare mighty things" in the parachute color pattern. The 70-foot-wide (21 m) parachute consisted of 80 strips of fabric that form a hemisphere-shape canopy, and each strip consisted of four pieces. Dr. Clark thus had 320 pieces with which to encode the message. He also included the GPS coordinates for the Jet Propulsion Laboratory's headquarters in Pasadena, California (34°11’58” N 118°10’31” W). Clark said that only six people knew about the message before landing. The code was deciphered a few hours after the image was presented by Perseverance's team.[109][110][111]
"Dare mighty things" is a quote attributed to U.S. president Theodore Roosevelt and is the unofficial motto of the Jet Propulsion Laboratory.[112] It adorns many of the JPL center's walls.
NASA outreach to students
NASA Eventbrite Virtual Guest Program Post flight mission patch given to Eventbrite subscribers during Perseverance landing
In December 2021, the NASA team announced a program to students who have persevered with academic challenges. Those nominated will be rewarded with a personal message beamed back from Mars by the Perseverance rover.
You've Got Perseverance - Nominate A Student (December 9, 2021)
Mars Helicopter Route Options out of 'Séítah' with EDL hardware
Ground tracks
The rover track as of sols 52–64 at Van Zyl Overlook
Variants as of sol 174 (August 19, 2021)
Positioning before the 2021 solar conjunction R210 is the rover position on sol 210; H163 1, H174 2 and H193 3 means 1st, 2nd and 3rd landing sites of Ingenuity on the Field H on sols 163, 174 and 193 respectively
Perseverance captured by Hirise camera on Mars Reconnaissance Orbiter at Maaz formation on February 26, 2022
Video and audio of the 4-th Ingenuity flight, April 30, 2021
Perseverance spotted by Ingenuity on its 11th flight, August 2021
Rochette, September 2021
Entry-descent-landing debris
Ingenuity photographed the spacecraft backshell and parachute (April 19) and other apparent EDL debris (April 3).[113]
Tracks of Perseverance on Ingenuity’s photos
April 22, 2021. First aerial image taken by Ingenuity
April 22, 2021. Second color image taken by Ingenuity
April 22, 2021. Third color image taken by Ingenuity
July 5, 2021. Ingenuity flies over Perseverance tracks
Panoramic 360° view from Perseverance's landing site, stitched together from more than 100 individual images.
April 4, 2021 (Sol 44) at 14:02:08 local mean solar time. Ingenuity with its solar cells sprinkled with sand stands before the rover
In its third flight Ingenuity spots Perseverance (left) in the aerial photo
March 5, 2024: NASA released images of transits of the moon Deimos, the moon Phobos and the planet Mercury as viewed by the Perseverance rover on the planet Mars.
Transits viewed from Mars by the Perseverance rover
^"Launch Windows". mars.nasa.gov. NASA. Archived from the original on July 31, 2020. Retrieved July 28, 2020. This article incorporates text from this source, which is in the public domain.
^ ab"Mars Perseverance Landing Press Kit"(PDF). Jet Propulsion Laboratory. NASA. Archived(PDF) from the original on February 18, 2021. Retrieved February 17, 2021. This article incorporates text from this source, which is in the public domain.
^ ab"Overview". mars.nasa.gov. NASA. Archived from the original on June 8, 2019. Retrieved October 6, 2020. This article incorporates text from this source, which is in the public domain.
^Mustard, J.F.; Adler, M.; Allwood, A.; et al. (July 1, 2013). "Report of the Mars 2020 Science Definition Team"(PDF). Mars Exploration Program Anal. Gr. NASA. Archived(PDF) from the original on October 20, 2020. Retrieved February 17, 2021. This article incorporates text from this source, which is in the public domain.
^"Objectives". 2020 Mission Perseverance Rover. NASA. Retrieved September 29, 2021.
^"Mars 2020 Rover's 7-Foot-Long Robotic Arm Installed". mars.nasa.gov. June 28, 2019. Archived from the original on December 5, 2020. Retrieved July 1, 2019. The main arm includes five electrical motors and five joints (known as the shoulder azimuth joint, shoulder elevation joint, elbow joint, wrist joint and turret joint). Measuring 7 feet (2.1 meters) long, the arm will allow the rover to work as a human geologist would: by holding and using science tools with its turret, which is essentially its hand. This article incorporates text from this source, which is in the public domain.
^Volpe, Richard. "2014 Robotics Activities at JPL"(PDF). Jet Propulsion Laboratory. NASA. Archived(PDF) from the original on February 21, 2021. Retrieved September 1, 2015. This article incorporates text from this source, which is in the public domain.
^ ab"Name the Rover". mars.nasa.gov. NASA. Archived from the original on November 21, 2020. Retrieved October 20, 2020. This article incorporates text from this source, which is in the public domain.
^"Mission Timeline > Cruise". mars.nasa.gov. NASA. Archived from the original on January 20, 2021. Retrieved January 20, 2021. This article incorporates text from this source, which is in the public domain.
Missions are ordered by launch date. Sign † indicates failure en route or before intended mission data returned. ‡ indicates use of the planet as a gravity assist en route to another destination.
Launches are separated by dots ( • ), payloads by commas ( , ), multiple names for the same satellite by slashes ( / ). Crewed flights are underlined. Launch failures are marked with the † sign. Payloads deployed from other spacecraft are (enclosed in parentheses).
.jpg)
Clickable image: Clicking on the labels will open a new article.
.png)
.jpg)
.png)
.png)
_ESA23161702.png)
.jpg)
_on_Jul_14_2020_aligned_to_stars.jpg)
.jpg)
.jpg)
