British Indian railways operated numerous steam locomotives built to their own design standards, and near and at the turn of the century, this created a considerable strain on British locomotive manufacturers who could not keep up with demand.[3][4] This led to British Indian railways outsourcing production of locomotives to non-British companies, which generated complaints from British locomotive manufacturers;[5] amidst this situation, proposals for standardisation of British Indian steam locomotives were made as early as the 1870s, in which there were prior plans to standardise locomotive designs for British Indian railways that never went through;[6] but later, a locomotive standardisation scheme for British Indian railways was finally realised when the BESC was requested by the British Indian government to develop standard locomotive classes for British Indian railways. [7][8][4] Its first report, compiled in 1903,[2][a] outlined plans for British Indian standard locomotives, being revised in 1907[9] and in 1910.[10]
History
This section needs expansion with: allocations of locomotives, classifications, if any more design changes were added, builders. You can help by adding to it. (September 2024)
The SP class locomotives were catalogued in the first report (1903) of the BESC on standard locomotives for the railways of the British Raj.[2]4-4-0 (American) locomotives were preferred in India as they had good riding qualities, even on poor track conditions.[citation needed] Later on, in the third report (1910) of the BESC of the same, a variant with a larger boiler was outlined, which had a diameter of 5 feet 1+1⁄4 inches (1,556 mm), as used in the PT (Passenger Tank) class locomotives.[10]
This section needs expansion with: if superheated variants used piston or slide valves. You can help by adding to it. (September 2024)
The design parameters outlined by the BESC were as follows: the locomotives were designed to use the same boiler as the SG (Standard Goods) class locomotives, which had a diameter of 4 feet 8+1⁄4 inches (1,429 mm),[2] and later the same boiler as the PT class locomotives[10]—the latter two locomotives built to broad gauge, two inside cylinders, a Belpaire firebox,[2] and saturated steam. The valve gear used was the Stephenson valve gear which was fitted inside the frames.[2] The grate was fitted between the two driving wheels. The diameter of the driving wheels necessitated splashers to be fitted over the wheels. A small pilot was fitted to the locomotive's buffer beam. The cab was enclosed, with the cab's rear wall being formed by the tender's half cab.
A later version was designed with a superheater and designated SPS (Standard Passenger, Superheated); SP locomotives retrofitted with superheaters were usually reclassified as SPC (Standard Passenger, Converted).[11]
^ abThe BESC report that first catalogued this locomotive design was compiled in 1903, but was not published until 1905 (British Standards Institution).
References
^"SG". Archived from the original on 6 January 2012. Retrieved 1 December 2013.
^"History of Steam: Broad Gauge". ISRS website. Indian Steam Railway Society (ISRS). Archived from the original on 29 June 2016. Retrieved 23 November 2024. As the various railways grew in size and traffic at different pace, demand for larger and more powerful locomotives also increased. Due to individual practices followed by different railways and the local tastes the various railway systems adopted to their own configuration of engines and this led to considerable delay in supply of these engines from various manufacturers in England.
^ abBhandari, R. R. "Steam in History". IRFCA website. Indian Railways Fan Club (IRFCA). Retrieved 8 September 2024.
^Bhandari, R. R. "Steam in History". IRFCA website. Indian Railways Fan Club (IRFCA). Retrieved 8 September 2024. [The inability of British locomotive manufacturers to meet demand] resulted in orders being placed on German and American manufacturers and ... protest was made on behalf of the [British locomotive manufacturers] in the British Parliament.
^"History of Steam: Broad Gauge". ISRS website. Indian Steam Railway Society (ISRS). Archived from the original on 29 June 2016. Retrieved 23 November 2024. Attempts at standardisation of locomotives were made as early as 1872 and 1879 but these were not conclusive.
^Report of the Locomotive Committee on Standard Locomotives for Indian Railways (Report). British Standards Institution. November 1903. p. 2. Retrieved 8 September 2024. The Locomotive Committee beg leave to report that, in accordance with instructions received through the Engineering Standards Committee from the Secretary of State for India, and with the assistance of a Conference between the Consulting Engineers and Locomotive Manufacturers of the country, they have carefully considered the questions of the most suitable designs of Locomotives for use on the Railways of India, and of the standardisation of their component parts.
![[icon]](File:Wiki_letter_w_cropped.svg){kind=small}
