The AT&T UNIX PC is a Unixdesktop computer originally developed by Convergent Technologies[2] (later acquired by Unisys),[5][1] and marketed by AT&T Information Systems in the mid- to late-1980s. The system was codenamed "Safari 4"[6] and is also known as the PC 7300. An updated version with larger hard drive was dubbed the "3B1". Despite the latter name, the system had little in common with AT&T's line of 3B series computers. The system was tailored for use as a productivity tool in office environments and as an electronic communication center.[7]
The initial PC 7300 model offered a modest 512 KB[2] of memory and a small, low performance 10 MB hard drive.[3] This model, although progressive in offering a Unix system for desktop office operation, was underpowered and produced considerable fan and drive bearing noise even when idling. The modern-looking "wedge" design by Mike Nuttall was innovative, and the machine gained notoriety appearing in numerous movies and TV shows as the token "computer".[8]
AT&T 3B/1
An enhanced model, "3B/1", was introduced in October 1985 starting at US$8,495 (equivalent to $24,100 in 2023).[9][1] The cover was redesigned to accommodate a full-height 67 MB hard drive.[1] This cover change added a 'hump' to the case, expanded onboard memory to 1 or 2 MB, as well as added a better power supply.[1]
S/50
Convergent Technologies offered an S/50 which was a re-badged PC 7300.[10]
Olivetti AT&T 3B1
Olivetti released the "Olivetti AT&T 3B1 Computer" in Europe.[11]
Operating system
The operating system is based on Unix System V Release 2,[2] with extensions from 4.1 and 4.2 BSD, System V Release 3 and Convergent Technologies.[1] The last release was 3.51.[1]
Windowing software (xt/layers) from SVR3 was provided to allow connection to a DMD 5620 graphics terminal.
The UNIX PC has three proprietary S4BUS slots for expansion cards:
DOS-73 8086co-processor card running at 8 MHz, Hercules graphics-compatible, with 512 KB RAM, an RS-232 COM2 port and optional 8087 math co-processor. Mouse, floppy, modem (on COM1), and printer are shared in a DOS session. MS-DOS 3.1 was included. This board was designed and built for AT&T by Alloy Computer Products of Framingham, MA.
RAM could be added using 512 KB RAM or 2 MB RAM cards, up to a maximum of 4 MB (2 MB on the motherboard and 2 MB on expansion cards).
EIA/RAM combo cards contained extra RAM (512 KB, 1 MB, or 1.5 MB) and two RS-232 serial ports.
Dual EIA port card (same card as the EIA/RAM but without the RAM sockets)
StarLAN 1 Mbit/s (1BASE5) network over twisted-pair wire local area network typically used in star format
AUDIX Voice Power (“Speech Processor”) card allowed for the capture and digital recording of voice conversations. This was an option of the "Integrated Solution" package for the AT&T System 25PBX where the UNIX PC served as the "Master Controller".[17]
PC/PBX Connection Package 4 for AT&T PBX System 75 or System 85
Expansion chassis card was hard-wired to the externally-powered Expansion Unit with five additional S4BUS slots (manufactured by Alloy Computer Products)