Waskerley Reservoir

Waskerley Reservoir
Waskerley Reservoir
Waskerley Reservoir
Location	County Durham, England
Coordinates	54°47′33″N 1°58′00″W
Type	reservoir
Catchment area	15 km^2 (5.8 sq mi)[1]
Managing agency	Northumbrian Water
Max. depth	24.3 m (80 ft)[1]
Water volume	2.0 million cubic metres (1,600 acre⋅ft)[1]
Surface elevation	355 m (1,165 ft) asl

Waskerley Reservoir is the largest of a group of three reservoirs located on Muggleswick Common, County Durham, with the others being Smiddy Shaw and Hisehope Reservoirs.

The reservoir, which was constructed in 1877, is owned and operated by Northumbrian Water.[2] It and Smiddy Shaw—which in turn is fed by Hisehope—feed water under gravity to a water treatment works at Honey Hill.[3] Because the three reservoirs cannot meet the full demand of Honey Hill, Waskerley can be replenished by a gravity feed from Burnhope Reservoir or, if necessary, by pumping water from the Tyne-Tees Tunnel via an airshaft.[3]

Waskerley and its two neighbouring reservoirs are located within the Muggleswick, Stanhope and Edmundbyers Commons and Blanchland Moor Site of Special Scientific Interest, which itself forms part of the North Pennines Area of Outstanding Natural Beauty.

See also

• List of reservoirs and dams in the United Kingdom

References

1. "British Dam Society - Durham Conference 2006" (PDF). British Dam Society. Retrieved 10 February 2011.
2. Waskerley, Smiddyshaw, Hisehope (pdf downloadable at "Our region". Northumbrian Water. Retrieved 11 February 2011.)
3. "Final Water Resources Management Plan 2010-2035". Northumbrian Water Ltd. Archived from the original on 19 April 2011. Retrieved 3 February 2011.)