|
Surface warfare insignia
 The surface warfare insignia is a military badge of the United States Navy which is issued to U.S. Navy personnel who are trained and qualified to perform duties aboard United States surface warships. There are presently four classes of the surface warfare pin, being that of line, staff, special operations, and enlisted. The line and enlisted surface warfare badges may be earned by United States Coast Guard personnel assigned to Navy commands. The various badge types are as follows: Surface warfare officer The surface warfare officer insignia is the first milestone qualification an eligible commissioned officer may receive in surface warfare. This device is commonly called the "SWO pin" in the U.S. Navy. Those receiving the pin must qualify as officer of the deck (both underway and in port), small boat officer, combat information center watch officer, and must be trained in shipboard engineering, naval history, and damage control. For further, enterprise-level training, officers will attend Surface Warfare Officers' School (SWOS) in Newport, Rhode Island between all sea tours. The surface warfare officer badge is typically a prerequisite for tactical action officer (TAO) training. Junior officers, typically Ensigns, assigned to the surface warfare community are known as "unqualified" or "1160s" until they receive qualification as a Surface Warfare Officer and receive the SWO pin. Surface line personnel who are not yet qualified have the 1160 officer designator: once qualified they receive the 1110 designator for Regular Navy Officers and 1115 for Navy Reserve Officers. Prior to 2018, junior officers were granted 24 months to qualify as Surface Warfare Officers; failing to do so within the time period meant either separation from the service or applying to transfer to another warfare community. The collisions involving the USS John S. McCain (DDG-56) and the USS Fitzgerald (DDG-62) brought about a change in qualification standards. Unqualified junior officers now have no official time limit to qualify within the two and a half years of their first tour, and now must qualify solely before they transfer to their next command. Failing to qualify prevents the officer from transferring. Officers who are separated from the SWO community go through a process called "Non-Attained" and this designation is entered into the officer's permanent military record. The Surface Warfare Officer pin was designed to depict the traditional and typical elements of naval service: waves breaking before the bow of a ship overlaid on crossed U.S. Navy commissioned officer's swords, rendered in gold. The insignia was introduced in 1975. Enlisted Surface Warfare Specialist (ESWS) On 1 December 1978, Chief of Naval Operations Admiral T.B. Hayward approved the enlisted surface warfare specialist (ESWS) qualification program. This approval followed immediately by the promulgation of OPNAV Instruction 1412.4, which provided the specific details of the program. Since the introduction of the surface warfare officer (SWO) qualification program in 1975, a strong advocacy for a similar program for surface enlisted was started. The program was initiated in 1977 when the surface warfare commanders (DCNO Surface Warfare, COMNAVSURFLANT and COMNAVSURFPAC) gave their conceptual approval to the development of a surface enlisted qualification program. Initial guidelines for the program at that time were:
The silver cutlass was available for the first time in April 1979. Specifically the criteria in 1979 to qualify was as follows:
OPNAVINST 1414.9 is the Navy instruction that governs the enlisted warfare qualification programs. This instruction also cancels OPNAVINST 1414.2A. The ESWS pin is authorized for wear by any enlisted member of the United States Navy who is permanently stationed aboard a navy afloat command and completes the enlisted surface warfare qualification program and personal qualification standards (PQS). The ESWS badge can be obtained at any time after reporting to a ship. If in the paygrade of E-5 (petty officer 2nd class), it is a requirement for advancement to E-6 (petty officer 1st class). It is extremely uncommon for sailors in paygrade E-3 and below to earn their ESWS pin but strongly encouraged to stand among their peers for promotion. Sailors for whom ESWS is their secondary community (mostly those in the air warfare community) are not required to re-qualify. An enlisted person who has qualified for his or her ESWS pin places the designator SW after his or her rate and rating; for example, Senior Chief Yeoman Martinez, having qualified for her ESWS pin, is identified as YNCS(SW) Martinez. For those enlisted personnel who are subsequently commissioned as officers and are shipboard SWO's, the ESWS badge is replaced, but only after they have fully completed their Surface Warfare Officer qualifications. Features of the Pin Unlike other warfare pins available to both enlisted and officers, the ESWS and SWO pins differ by more than just color (gold for officers and silver for enlisted is a common theme in U.S. Navy uniforms). The blade weapons behind the hull on the SWO pin are swords. The blade weapons on the enlisted pin are cutlasses. This can clearly be seen in the curvature of the blades and the shape of the handguards. This derives from the sword being a symbol of naval officers and their authority, while cutlasses were traditionally issued for battle to enlisted sailors during the age of sail. The ship that is featured in the middle of the pin is that of a “modern warship” of when the pin came out in 1978 and looks as if it’s a Knox Class Frigate. The ESWS is 15⁄16 inch (24 mm) tall and 2.75 inches (70 mm) wide.[1] Updated ESWS requirements as of November 2020The new instruction will do away with the requirement for all first-tour Sailors to walk away from their first sea-duty command with their ESWS qualification. Sailors will not be required to enroll in a command’s ESWS program until they reach a journeyman or master-level (E-5 - E-9). These Sailors will be enrolled in their ESWS program after 12 months onboard, or at the commanding officer’s discretion, and from there will have 18 months to qualify in ESWS. In attempts to improve damage control and ship survivability, the updated program will add more prerequisite PQS, including the following:
Medical corps officer Surface warfare medical corps insignia: A gold metal pin, with a spread oak leaf surcharged with a silver acorn on two crossed swords, on a background of ocean swells. Nurse corps officer Surface warfare nurse corps insignia: A gold metal pin, with a spread oak leaf on two crossed swords, on a background of ocean swells. Dental corps officer Surface warfare dental corps insignia: A gold metal pin, with a spread oak leaf, a silver acorn on each side of the stem on two crossed swords, on a background of ocean swells. Medical service corps officer Surface warfare medical service corps insignia: A gold metal pin, with a spread oak leaf, attached to a slanting twig on two crossed swords, on a background of ocean swells. Supply corps officer The surface warfare supply corps insignia is granted to those members of the Navy Supply Corps who qualify as surface warfare supply officers. Such officers are trained in shipboard supply systems, food service, housing and welfare service, disbursing operations, damage control, and basics of the ship's engineering systems. Post 2018 and the McCain and Fitzgerald Crashes, SWSCO candidates and qualified officer do not stand Officer of the Deck (OOD) Underway. Depending on the ship type they will receive training in shipboard flight operations as the Helicopter Control Officer. For advancement in the surface supply community, the Surface Warfare Supply Corps Officer Pin (SWSCO) must be obtained by junior supply officers within 18 months from reporting on board a naval vessel. Those failing to qualify as a surface supply officer are transferred to permanent ground assignment as shore supply officers. Other versions of the supply corps pin include the Naval Aviation Supply Corps insignia, the Submarine Supply Corps insignia and the Navy Expeditionary Supply Corps insignia. Surface chaplain officer The Surface Chaplain Officer Qualification Insignia is a newly introduced warfare pin for members of the surface chaplain corps. The qualification insignia started being awarded to qualified chaplains in 2023 after being approved by the Navy Uniform Board.[2] Coast Guard Cutterman insignia – officer  Cutterman insignia – enlisted The United States Coast Guard does not issue the surface warfare pin. The comparable Coast Guard insignia is the cutterman insignia. The cutterman insignia is awarded on a temporary basis upon completion of a PQS and is made permanent upon accumulation of five years sea time. Coast Guard personnel who are permanently cross-assigned to afloat Navy commands may qualify for the surface warfare badge through the standard Navy qualification system. NOAA Commissioned Corps The NOAA Commissioned Corps deck officer pin is a gold-colored pin displaying breaking waves, with a central device consisting of a fouled anchor surcharged with a NOAA Corps device. NOAA Corps officers certified as senior watch officer may wear the NOAA deck officer insignia after authorization by the Director of the NOAA Corps. See also
References
External links
|
