The Sumpter Valley Railway, or Sumpter Valley Railroad, is a 3 ft (914 mm) narrow gaugeheritage railroad located in Baker County, in the U.S. state of Oregon. Built on a right-of-way used by the original railway of the same name, it carries excursion trains on a roughly 5-mile (8.0 km) route between McEwen and Sumpter.[2] The railroad has two steam locomotives and several other pieces of rolling stock.[3] Passenger excursion trains operate on weekends and holidays from Memorial Day through the end of September.[3]
History
Route in 1931
The railway was incorporated in 1890 by David Eccles.[4] The 3 ft (914 mm) narrow gauge railway's purpose was to haul logs to the Oregon Lumber Company sawmill in South Baker City. The sawmill and railroad remained separate corporations of the same owners for the life of the railroad.[5] The builders of the railway also owned the Grande Ronde Lumber Company in Perry, Oregon, and the railway was financed by Mormons in Utah.[6] The line was built over terrain originally considered as part of a railway from Denver, Colorado to the Pacific coast; but the Union Pacific Railroad opted for a different route to avoid bypassing growing communities which might provide an attractive opportunity for competition by the rapidly growing Oregon Railroad and Navigation Company.[5]
Much of the original equipment came from the Utah & Northern Railway in Idaho and Montana. The Union Pacific owned the line and began converting it to standard gauge around 1887. Eccles owned a significant amount of Union Pacific stock, exerting enough influence to acquire the now-unneeded narrow gauge equipment. The first locomotive to arrive was a small 4-4-0 numbered 285; the Sumpter Valley also purchased a number of the U&N's Brooks 2-6-0 locomotives, along with a large number of boxcars and flatcars. In 1906, the railroad also acquired four locomotives from the Tonopah Railway (later the Tonopah & Goldfield Railroad).[4]
By 1891, the line had reached McEwen, 22 miles (35 km) west of Baker City, and the railroad began offering passenger and freight service. To reach uncut forests further west, the company extended the line in stages. It reached Sumpter in 1896 and continued southwestward to Whitney, Tipton, Austin and Bates. By 1910, it arrived in Prairie City, a ranching and mining community along the John Day River in Grant County.[7] The railroad continued to use wood fuel for their locomotives until converting to oil fuel in June, 1940. Diamond-shaped smokestacks were replaced by cabbage-shaped Rushton stacks after 1916.[5]
Ten years later, the railway began losing business to automobiles and trucks, and in 1933 the 20 miles (32 km) of track between Prairie City and Bates were abandoned. Scheduled passenger service on the remaining line ended in 1937. Freight service remained, however, and in 1939 the railway purchased two 2-6-6-2TMallet locomotives from the Uintah Railway in Colorado. These engines were converted from coal to oil burners and given tenders from two 2-8-2 locomotives. As traffic declined, the railway sold off the other, unneeded locomotives.[4] In 1947, the railroad ceased all operations except for 1.5 miles (2.4 km) of track in the Oregon Lumber Company yard in South Baker City. This last section was abandoned and removed in 1961.[7]
Heritage operation
In 1971, a group of volunteers set out to rebuild the Sumpter Valley Railway. Locomotive No. 3, a 1915 Heislersteam locomotive, was restored to operation in 1976, and the new railway opened for business on July 4, 1976, over a track of less than 1 mile (1.6 km).[2] The Sumpter Valley Railroad Restoration Inc. was created and 6 miles of track were reinstalled by hand over the next 15 years, to connect the McEwen, Oregon station with Sumpter, Oregon. SVR No. 19, a 2-8-2 steam locomotive built in 1920, was restored to operating condition in 1996.[8] Sister locomotive 20 is also located at the railroad. In 2018, #720 was added to the railroad operating fleet after an overhaul.[9] It previously was used by the Chiquita Banana company.[10]
In 2007, the railway opened its reproduction of the original Sumpter Depot, within sight of the Sumpter Valley Dredge State Heritage Area operated by the Oregon Parks and Recreation Department. The railway operates a number of historic Sumpter Valley Railroad and adjoining 3 ft (914 mm) narrow gauge logging railroad steam locomotives and equipment on the line every summer.[2]
In Prairie City at the western end of the original line, the Sumpter Valley Depot Restoration Committee renovated the Sumpter Valley Railway Passenger Station in the 1970s. The City of Prairie City has used it to house the DeWitt Museum since 1984. Its collections include lanterns, lights, and other railway artifacts, and photographs of train wrecks and of life along the rail line.[11]
Gallery
Excursion train on the line in 2010
Railcar of the Sumpter Valley Line
DeWitt Museum in Prairie City, Oregon, a former SVR passenger station
^ abcFerrell, Mallory Hope (1970). Rails, Sagebrush, and Pine. San Marino, CA: Golden West Books.
^ abcdFerrell, Mallory Hope (1964). "Sumpter Valley Railway". The Western Railroader. 27 (293). Francis A. Guido: 1–14.
^Bailey, Barbara Ruth (1982). Main Street: Northeastern Oregon. Oregon Historical Society. pp. 32–33. ISBN0-87595-073-6. principally a logging railroad, was constructed in Baker County with Mormon backing from Utah. Its builders also owned the Grande Ronde Lumber Company, which operated a large mill and mill village at Perry, near La Grande.
_(bakDA0073a).jpg)
