Redesdale Bridge

Redesdale Bridge
Coordinates37°00′57″S 144°32′28″E / 37.0158°S 144.5412°E / -37.0158; 144.5412
Carries[C326] Heathcote-Kyneton Road
CrossesCampaspe River
LocaleRedesdale, Victoria, Australia
Characteristics
DesignWrought Iron truss
Total length60 metres (196 ft 10 in)
Width14.3 metres (46 ft 11 in)
Longest span54.7 metres (179 ft 6 in)[1]
History
Opened1868
Location
Map

The Redesdale Bridge is one of the oldest iron lattice-truss bridges in Victoria, Australia. The Redesdale Bridge is a wrought iron and timber structure with bluestone abutments, spanning the Campaspe River near the town of Redesdale.[2]

History

The bridge was completed in January 1868, despite a carved commemoration stone having the date 1867.[3] In early 2015, the name of Redesdale Bridge was adopted by the Office of Geographic Names and formally gazetted in the Victorian Government Gazette on 19 March 2015.[4]

The trusses for the bridge were originally imported in 1859 for the Hawthorn Bridge over the Yarra River connecting the suburbs of Richmond and Hawthorn.[5] The ship Herald of the Morning, at the end of its second voyage to Australia in 1859, whilst bringing 419 immigrants and a mixed cargo that included the wrought iron trusses, caught fire and sank in Hobsons Bay.[6] As a result, the Hawthorn bridge was delayed for several years while new trusses were made and shipped out to Australia.[7]

Ten years later the original trusses were salvaged from wreck of Herald of the Morning at the bottom of Hobsons Bay [8] and sold privately to the Melbourne foundry Langlands & Co.[3] The wreck was advertised for sale on 29 November 1859.[9] Two hundred tons of ironwork were purchased by the goldfields shires of McIvor and Metcalfe for £1000. Prominent Melbourne engineer T.B. Muntz designed the bridge and a contractor named Doran won the construction contract. The final cost of the bridge was £6274.[3]

The bridge was constructed with a divided-lane through-truss design, created specifically for the difficult river crossing and unique in Victoria. The trusses were originally intended for a deck truss design, but were adapted to allow their use as through trusses with stiffening arches connecting them above the roadway. Two separate roadways with an intervening stone pillar separating them have caused problems for modern traffic. The road deck is made with longitudinal timber planks on large timber cross girders that are supported on the lower chords of the trusses.[3]

Similar bridge

Whereas the huge lattice truss girders of the Redesdale Bridge had been imported from England in 1859, the colonial engineering works which had in the meantime developed to service reef and deep lead mining were quite capable of supplying such products for the Central Victorian, Glenmona Bridge, by 1870.[10]

See also

References

  1. ^ "National Trust Register citation B1541".
  2. ^ O'Connor, Colin (1985). Spanning Two Centuries: Historic Bridges of Australia. Brisbane, Queensland: University of Queensland Press. ISBN 978-0702217982. p.106.
  3. ^ a b c d "Redesdale Bridge, Victorian Heritage Register (VHR) Number H1419, Heritage Overlay HO230". Victorian Heritage Database. Heritage Victoria. Retrieved 1 April 2015.
  4. ^ "Redesdale Bridge". Victorian Government Gazette. G11.
  5. ^ National Trust Register citation B1541 Retrieved2015-04-01"
  6. ^ State Records Authority of New South Wales: Shipping Master's Office; Passengers Arriving 1855 - 1922; NRS13278, 9X98-1000 reel 406, Transcribed by Gloria Sheehan, 2005 Archived 2012-05-05 at the Wayback Machine
  7. ^ Victoria, Hansard, 1859-60, p. 1063, Legislative Assembly, 3 May 1860 (Smith and Service); also Hansard (Legislative Assembly) 1861, p. 368 (Smith) and p. 1083 (Brooke)
  8. ^ HERALD OF THE MORNING, VHR Number S330
  9. ^ "Advertising" The Argus 24 Nov 1859: 2. Web. 3 Aug 2012
  10. ^ "Glenmona Bridge". 3 September 1999.

Media related to Redesdale Bridge at Wikimedia Commons