A joint Politics and Economics series
Social choice and electoral systems
Social choice Mechanism design Comparative politics Comparison List (By country)
Single-winner methods Single vote - plurality methods First preference plurality (FPP) Two-round (US: Jungle primary) Partisan primary Instant-runoff UK: Alternative vote US: Ranked-choice (RCV) Condorcet methods Condorcet-IRV Round-robin voting Minimax Schulze Ranked pairs Maximal lottery Positional voting Plurality (el. IRV) Borda count (el. Baldwin) Antiplurality (el. Coombs) Cardinal voting Score voting Approval voting Majority judgment STAR voting
Proportional representation Party-list Apportionment Highest averages Largest remainders National remnant Biproportional List type Closed list Open list Panachage List-free PR Localized list Quota-remainder methods Hare STV Schulze STV CPO-STV Quota Borda Approval-based committees Thiele's method Phragmen's method Expanding approvals rule Method of equal shares Fractional social choice Direct representation Interactive representation Liquid democracy Fractional approval voting Maximal lottery Random ballot Semi-proportional representation Cumulative SNTV Limited voting
Mixed systems By results of combination Mixed-member majoritarian Mixed-member proportional By mechanism of combination Non-compensatory Parallel (superposition) Coexistence Conditional Fusion (majority bonus) Compensatory Seat linkage system UK: 'AMS' NZ: 'MMP' Vote linkage system Negative vote transfer Mixed ballot Supermixed systems Dual-member proportional Rural–urban proportional Majority jackpot By ballot type Single vote Double simultaneous vote Dual-vote
Paradoxes and pathologies Spoiler effects Spoiler effect Cloning paradox Frustrated majorities paradox Center squeeze Pathological response Perverse response Best-is-worst paradox No-show paradox Multiple districts paradox Strategic voting Lesser evil voting Exaggeration Truncation Turkey-raising Paradoxes of majority rule Dominance paradox Tyranny of the majority Discursive dilemma Conflicting majorities paradox
Social and collective choice Impossibility theorems Arrow's theorem Majority impossibility Moulin's impossibility theorem McKelvey–Schofield chaos theorem Gibbard's theorem Positive results Median voter theorem Condorcet's jury theorem May's theorem Condorcet dominance theorems Harsanyi's utilitarian theorem
Politics portal Economics portal Mathematics portal
v t e

Multiwinner,^[1] at-large, or committee^[2][3] voting refers to electoral systems that elect several candidates at once. Such methods can be used to elect parliaments or committees.

There are many scenarios in which multiwinner voting is useful. They can be broadly classified into three classes, based on the main objective in electing the committee:^[4]

1. Excellence. Here, voters judge the quality of each candidate individually. The goal is to find the "objectively" best candidates. An example application is shortlisting: selecting, from a list of candidate employees, a small set of finalists, who will proceed to the final stage of evaluation (e.g. using an interview). Here, each candidate is evaluated independently of the others. If two candidates are similar, then probably both will be elected or both will be rejected.
2. Diversity. Here, the elected candidates should be as different as possible. For example, suppose the candidates are possible locations for constructing a facility, such as a fire station. Most citizens naturally prefer a fire station in the city center. However, there is no need to have two fire-stations in the same place; it is better to diversify the selection and put the second station in a more remote location. In contrast to the "excellence" setting, if two candidates are similar, then probably exactly one of them will be elected. Another scenario in which diversity is important is when a search engine selects results for display, or when an airline selects movies for screening during a flight.
3. Proportionality. Here, the elected candidates should represent the diverse opinion held by the population of voters, measured by the votes they cast, as much as possible. This is a common goal in parliamentary elections; see proportional representation.

A major challenge in the study of multiwinner voting is finding reasonable adaptations of concepts from single-winner voting. These can be classified based on the voting type—approval voting vs. ranked voting.

Some election systems elect multiple members by competition held among individual candidates. Such systems are some variations of multiple non-transferable voting and single transferable voting.

In other systems, candidates are grouped in committees (slates) and voters cast votes for the committees (or slates).

Approval voting is a common method for single-winner elections and sometimes for multiwinner elections. In single-winner elections, each voter marks the candidate he approves, and the candidate with the most votes wins.

With multiwinner voting, there are many ways to decide which candidate should be elected. In some, each voter ranks the candidates; in others they cast X votes. As well, each voter may cast single or multiple votes.

Already in 1895, Thiele suggested a family of weight-based rules called Thiele's voting rules.^[2][5] Each rule in the family is defined by a sequence of k weakly-positive weights, w₁,...,w_k (where k is the committee size). Each voter assigns, to each committee containing p candidates approved by the voter, a score equal to w₁+...+w_p. The committee with the highest total score is elected. Some common voting rules in Thiele's family are:

• Multiple non-transferable vote (MNTV): the weight vector is (1,1,...,1). It is also called plurality-at-large approval-voting.
• Approval-Chamberlin-Courant (ACC): the weight vector is (1,0,...,0). That is, each voter gives 1 point to a committee, if and only if it contains one of his approved candidates.
• Proportional approval voting (PAV): the weight vector is the Harmonic progression (1, 1/2, 1/3, ..., 1/k).

There are rules based on other principles, such as minimax approval voting^[6] and its generalizations,^[7] as well as Phragmen's voting rules^[8] and the method of equal shares.^[9][10]

The complexity of determining the winners vary: MNTV winners can be found in polynomial time, while Chamberlin-Courant^[11] and PAV are both NP-hard.

Positional scoring rules are common in rank-based single-winner voting. Each voter ranks the candidates from best to worst, a pre-specified function assigns a score to each candidate based on his rank, and the candidate with the highest total score is elected.

In multiwinner voting held using these systems, we need to assign scores to committees rather than to individual candidates. There are various ways to do this, for example:^[1]

• Single non-transferable vote: each voter gives 1 point to a committee, if it contains his most preferred candidate. In other words: each voter votes for a single candidate in a contest that elects multiwinners, and the k candidates with the largest number of votes are elected. This generalizes First-past-the-post voting. It can be computed in polynomial time.

• Multiple non-transferable vote (also called bloc voting): each voter gives 1 point to a committee for each open seat in his top k. In other words: each voter votes for k candidates where k seats are open, and the k candidates with the largest number of votes are elected.

• k-Borda: each voter gives, to each committee member, his Borda count. Each voter ranks the candidates and the rankings are scored together. The k candidates with the highest total Borda score are elected.
• Borda-Chamberlin-Courant (BCC): each voter gives, to each committee, the Borda count of his most preferred candidate in the committee.^[12] Computing the winner with BCC is NP-hard.^[11]

In single-winner voting, a Condorcet winner is a candidate who wins in every head-to-head election against each of the other candidates. A Condorcet method is a method that selects a Condorcet winner whenever it exists. There are several ways to adapt Condorcet's criterion to multiwinner voting:

• The first adaptation was by Peter Fishburn:^[13][14] a committee is a Condorcet committee if it is preferred, by a majority of voters, to any other possible committee. Fishburn assumed that the voters rank committees by the number of members in their approval set (i.e. they have dichotomous preferences). Later works assumed that the voters rank committees by other criteria, such as by their Borda count. It is coNP-complete to check if a committee satisfies this criterion, and coNP-hard to decide if there exist a Condorcet committee.^[15]
• Another adaptation was by Gehrlein^[16] and Ratliff:^[17] a committee is a Condorcet committee if each candidate in it is preferred, by a majority of voters, to each candidate outside it. A multiwinner voting rule is sometimes called stable if it selects a Condorcet set whenever it exists.^[18] Some stable rules are:^[19]
  • Multiwinner Copeland's method: each committee is scored by the "number of external defeats": the number of pairs (c,d) where c is in the committee, d is not, and c is preferred to d by a majority of the voters.
  • Multiwinner Minimax Condorcet method: each committee is scored by the "size of external opposition": the minimum, over all pairs (c,d), of the number of voters who prefer c.
  • Multiwinner variants of some other Condorcet rules.^[20]
• A third adaptation was by Elkind, Lang and Saffidine:^[21] a Condorcet winning set is a set that, for each member d not in the set, some member c in the set is preferred to d by a majority. Based on this definition, they present a different multiwinner variant of the Minimax Condorcet method.

Excellence means that the committee should contain the "best" candidates. Excellence-based voting rules are often called screening rules.^[18] They are often used as a first step in a selection of a single best candidate, that is, a method for creating a shortlist. A basic property that should be satisfied by such a rule is committee monotonicity (also called house monotonicity, a variant of resource monotonicity): if some k candidates are elected by a rule, and then the committee size increases to k+1 and the rule is re-applied, then the first k candidates should still be elected. Some families of committee-monotone rules are:

• Sequential rules:^[18] using any single-winner voting rule, pick a single candidate and add it to the committee. Repeat the process k times.
• Best-k rules:^[1] using any scoring rule, assign a score to each candidate. Pick the k candidates with the highest scores.

The property of committee monotonicity is incompatible with the property of stability (a particular adaptation of Condorcet's criterion): there exists a single voting profile that admits a unique Condorcet set of size 2, and a unique Condorcet set of size 3, and they are disjoint (the set of size 2 is not contained in the set of size 3).^[18]

On the other hand, there exists a family of positional scoring rules - the separable positional scoring rules - that are committee-monotone. These rules are also computable in polynomial time (if their underlying single-winner scoring functions are).^[1] For example, k-Borda is separable while multiple non-transferable vote is not.

Diversity means that the committee should contain the top-ranked candidates of as many voters as possible. Formally, the following axioms are reasonable for diversity-centered applications:

• Narrow-top criterion:^[1] if there exists a committee of size k containing the top-ranked candidate of every voter, then it should be elected.
• Top-member monotonicity:^[22] if a committee is elected, and some voter shifts upwards the rank of his most-preferred winner, then the same committee should be elected.

Proportionality means that each cohesive group of voters (that is: a group of voters with similar preferences) should be represented by a number of winners proportional to its size. Formally, if the committee is of size k, there are n voters, and some L*n/k voters rank the same L candidates at the top (or approve the same L candidates), then these L candidates should be elected. This principle is easy to implement when the voters vote for parties (in party-list systems), but it can also be adapted to approval voting or ranked voting; see justified representation and proportionality for solid coalitions.

• Participatory budgeting—can be seen as a generalization of multiwinner voting where candidates have different costs