Model C stellarator
The Model C stellarator was the first large-scale stellarator to be built, during the early stages of fusion power research. Planned since 1952, construction began in 1961 at what is today the Princeton Plasma Physics Laboratory (PPPL).[1] The Model C followed the table-top sized Model A, and a series of Model B machines that refined the stellarator concept and provided the basis for the Model C, which intended to reach break-even conditions. Model C ultimately failed to reach this goal, producing electron temperatures of 400 eV when about 100,000 were needed. In 1969, after UK researchers confirmed that the USSR's T-3 tokamak was reaching 1000 eV, the Model C was converted to the Symmetrical Tokamak, and stellarator development at PPPL ended. Design parametersThe Model C had a racetrack shape. The total circumference of the magnetic axis was 12 m.[2] The plasma could have a 5-7.5 cm minor radius. Magnetic coils could produce a toroidal field (along the tube) of 35,000 Gauss.[1] It was only capable of pulsed operation. It had a divertor in one of the straight sections. In the other it could inject 4 MW of 25 MHz ion cyclotron resonance heating (ICRH). It had helical windings on the curved sections. ResultsAn average ion temperature of 400 eV was reached in 1969. HistoryConstruction funding/approval was announced in April 1957 with the design based on Katherine Weimer's efforts in fundamental research.[3][4] It started operating March 1962.[5] The Model C was reconfigured as a tokamak in 1969,[1] becoming the Symmetric Tokamak (ST).[6] References
Further reading
|