The Hirth HM 512 was a 12-cylinder development of the earlier, 6-cylinder HM 506, produced in the late 1930s. Both were supercharged, inverted V, air-cooled engines.[2]
Design and development
The HM 512 shared the same bore and stroke (105 mm × 115 mm) and 6:1 compression ratio with the rest of the HM500 series air-cooled engines. Other shared features were Hirth's use of roller bearings in the crankshaft and at both ends of connecting rods. The crankshaft was of typical Hirth multipart design, the 12-cylinders requiring 7 roller bearings. Like the HM 508, the drive was geared down by 1:1.5.[3]
Variants
HM 512A
Initial version; take off power 400 hp (300 kW), continuous 360 hp (270 kW)
HM 512B
Take off power 450 hp (335 kW), continuous 360 hp (270 kW)[3]
Oil system: Metered fresh oil to cylinder barrels and crankshaft bearings at 3.5–4.5 atm (51.44–66.13 psi; 3.55–4.56 bar). Splash lubrication for supercharger and camshaft. Stökicht Sun and planet reduction gear lubricated by high pressure oil.
Cooling system: Air-cooled
Performance
Power output:
400 PS (395 hp; 294 kW) at 3,110 rpm (1 minute) at sea level
360 PS (355 hp; 265 kW) at 3,000 rpm (5 minutes) at sea level
330 PS (325 hp; 243 kW) at 2,910 rpm (30 minutes) at sea level
300 PS (296 hp; 221 kW) at 2,810 rpm (max. continuous) at sea level
^ abcGrey, C.G.; Bridgman, Leonard, eds. (1938). Jane's all the World's Aircraft 1938. London: Sampson Low, Marston & company, ltd. p. 61d.
^Schneider, Helmut (Dipl.Ing.) (1944). Flugzeug-Typenbuch. Handbuch der deutschen Luftfahrt- und Zubehör-Industrie 1944 (in German) (Facsimile reprint 1986 ed.). Leipzig: Herm. Beyer Verlag. pp. 402–403. ISBN381120484X.
Works cited
Gunston, Bill (1989). World Encyclopaedia of Aero Engines (2 ed.). Wellingborough: Patrick Stephens Ltd. ISBN1-85260-163-9.