Diagnostic odds ratio

log(Diagnostic Odds Ratio) for varying sensitivity and specificity

In medical testing with binary classification, the diagnostic odds ratio (DOR) is a measure of the effectiveness of a diagnostic test.[1] It is defined as the ratio of the odds of the test being positive if the subject has a disease relative to the odds of the test being positive if the subject does not have the disease.

The rationale for the diagnostic odds ratio is that it is a single indicator of test performance (like accuracy and Youden's J statistic) but which is independent of prevalence (unlike accuracy) and is presented as an odds ratio, which is familiar to medical practitioners.^[citation needed]

Definition

The diagnostic odds ratio is defined mathematically as:

${\displaystyle {\text{Diagnostic odds ratio, DOR}}={\frac {TP/FN}{FP/TN}}={\frac {TP/FP}{FN/TN}}={\frac {TP\cdot TN}{FP\cdot FN}}}$[2][3]

where ${\displaystyle TP}$, ${\displaystyle FN}$, ${\displaystyle FP}$ and ${\displaystyle TN}$ are the number of true positives, false negatives, false positives and true negatives respectively.[1]

Confidence interval

As with the odds ratio, the logarithm of the diagnostic odds ratio is approximately normally distributed.^[clarification needed] The standard error of the log diagnostic odds ratio is approximately:

${\displaystyle \mathrm {SE} \left(\ln {\text{DOR}}\right)={\sqrt {{\frac {1}{TP}}+{\frac {1}{FN}}+{\frac {1}{FP}}+{\frac {1}{TN}}}}}$

From this an approximate 95% confidence interval can be calculated for the log diagnostic odds ratio:

${\displaystyle \ln {\text{DOR}}\pm 1.96\times \mathrm {SE} \left(\ln {\text{DOR}}\right)}$

Exponentiation of the approximate confidence interval for the log diagnostic odds ratio gives the approximate confidence interval for the diagnostic odds ratio.[1]

Interpretation

The diagnostic odds ratio ranges from zero to infinity, although for useful tests it is greater than one, and higher diagnostic odds ratios are indicative of better test performance.[1] Diagnostic odds ratios less than one indicate that the test can be improved by simply inverting the outcome of the test – the test is in the wrong direction, while a diagnostic odds ratio of exactly one means that the test is equally likely to predict a positive outcome whatever the true condition – the test gives no information.^[citation needed]

Relation to other measures of diagnostic test accuracy

The diagnostic odds ratio may be expressed in terms of the sensitivity and specificity of the test:[1]

${\displaystyle {\text{DOR}}={\frac {{\text{sensitivity}}\times {\text{specificity}}}{\left(1-{\text{sensitivity}}\right)\times \left(1-{\text{specificity}}\right)}}}$

It may also be expressed in terms of the Positive predictive value (PPV) and Negative predictive value (NPV):[1]

${\displaystyle {\text{DOR}}={\frac {{\text{PPV}}\times {\text{NPV}}}{\left(1-{\text{PPV}}\right)\times \left(1-{\text{NPV}}\right)}}}$

It is also related to the likelihood ratios, ${\displaystyle LR+}$ and ${\displaystyle LR-}$:[1]

${\displaystyle {\text{DOR}}={\frac {LR+}{LR-}}}$

Uses

The log diagnostic odds ratio is sometimes used in meta-analyses of diagnostic test accuracy studies due to its simplicity (being approximately normally distributed).[4]

Traditional meta-analytic techniques such as inverse-variance weighting can be used to combine log diagnostic odds ratios computed from a number of data sources to produce an overall diagnostic odds ratio for the test in question.^[citation needed]

The log diagnostic odds ratio can also be used to study the trade-off between sensitivity and specificity[5][6] by expressing the log diagnostic odds ratio in terms of the logit of the true positive rate (sensitivity) and false positive rate (1 − specificity), and by additionally constructing a measure, ${\displaystyle S}$:

${\displaystyle D=\log {\text{DOR}}=\log {\left[{\frac {TPR}{(1-TPR)}}\times {\frac {(1-FPR)}{FPR}}\right]}=\operatorname {logit} (TPR)-\operatorname {logit} (FPR)}$

${\displaystyle S=\operatorname {logit} (TPR)+\operatorname {logit} (FPR)}$

It is then possible to fit a straight line, ${\displaystyle D=a+bS}$. If b ≠ 0 then there is a trend in diagnostic performance with threshold beyond the simple trade-off of sensitivity and specificity. The value a can be used to plot a summary ROC (SROC) curve.[5][6]

Example

Consider a test with the following 2×2 confusion matrix:

Test     outcome Condition (as determined by “Gold standard”)	Positive	Negative
Positive	26	3
Negative	12	48

We calculate the diagnostic odds ratio as:

${\displaystyle {\text{DOR}}={\frac {TP/FP}{FN/TN}}={\frac {26/12}{3/48}}=34.666\ldots \approx 35}$

This diagnostic odds ratio is greater than one, so we know that the test is discriminating correctly. We compute the confidence interval for the diagnostic odds ratio of this test as [9, 134].

Criticisms

The diagnostic odds ratio is undefined when the number of false negatives or false positives is zero – if both false negatives and false positives are zero, then the test is perfect, but if only one is, this ratio does not give a usable measure. The typical response to such a scenario is to add 0.5 to all cells in the contingency table,[1][7] although this should not be seen as a correction as it introduces a bias to results.[5] It is suggested that the adjustment is made to all contingency tables, even if there are no cells with zero entries.[5]

See also

• Sensitivity and specificity
• Binary classification
• Positive predictive value and negative predictive value
• Odds ratio

References

1. Glas, Afina S.; Lijmer, Jeroen G.; Prins, Martin H.; Bonsel, Gouke J.; Bossuyt, Patrick M.M. (2003). "The diagnostic odds ratio: a single indicator of test performance". Journal of Clinical Epidemiology. 56 (11): 1129–1135. doi:10.1016/S0895-4356(03)00177-X. PMID 14615004.
2. Macaskill, Petra; Gatsonis, Constantine; Deeks, Jonathan; Harbord, Roger; Takwoingi, Yemisi (23 December 2010). "Chapter 10: Analysing and presenting results". In Deeks, J.J.; Bossuyt, P.M.; Gatsonis, C. (eds.). Cochrane Handbook for Systematic Reviews of Diagnostic Test Accuracy (PDF) (1.0 ed.). The Cochrane Collaboration.
3. Glas, Afina S.; Lijmer, Jeroen G.; Prins, Martin H.; Bonsel, Gouke J.; Bossuyt, Patrick M.M. (November 2003). "The diagnostic odds ratio: a single indicator of test performance". Journal of Clinical Epidemiology. 56 (11): 1129–1135. doi:10.1016/S0895-4356(03)00177-X. PMID 14615004.
4. Gatsonis, C; Paliwal, P (2006). "Meta-analysis of diagnostic and screening test accuracy evaluations: Methodologic primer". AJR. American Journal of Roentgenology. 187 (2): 271–81. doi:10.2214/AJR.06.0226. PMID 16861527.
5. Moses, L. E.; Shapiro, D; Littenberg, B (1993). "Combining independent studies of a diagnostic test into a summary ROC curve: Data-analytic approaches and some additional considerations". Statistics in Medicine. 12 (14): 1293–316. doi:10.1002/sim.4780121403. PMID 8210827.
6. Dinnes, J; Deeks, J; Kunst, H; Gibson, A; Cummins, E; Waugh, N; Drobniewski, F; Lalvani, A (2007). "A systematic review of rapid diagnostic tests for the detection of tuberculosis infection". Health Technology Assessment. 11 (3): 1–196. doi:10.3310/hta11030. PMID 17266837.
7. Cox, D.R. (1970). The analysis of binary data. London: Methuen. ISBN 9780416104004.

Further reading

• Glas, Afina S.; Lijmer, Jeroen G.; Prins, Martin H.; Bonsel, Gouke J.; Bossuyt, Patrick M.M. (2003). "The diagnostic odds ratio: a single indicator of test performance". Journal of Clinical Epidemiology. 56 (11): 1129–1135. doi:10.1016/S0895-4356(03)00177-X. PMID 14615004.
• Böhning, Dankmar; Holling, Heinz; Patilea, Valentin (2010). "A limitation of the diagnostic-odds ratio in determining an optimal cut-off value for a continuous diagnostic test". Statistical Methods in Medical Research. 20 (5): 541–550. doi:10.1177/0962280210374532. PMID 20639268. S2CID 21221535.
• Chicco, Davide; Starovoitov, Valery; Jurman, Giuseppe (2021). "The benefits of the Matthews correlation coefficient (MCC) over the diagnostic odds ratio (DOR) in binary classification assessment". IEEE Access. 9: 47112–47124. doi:10.1109/ACCESS.2021.3068614. hdl:10281/431140.

External links

• Why Bayes rule is nicer with odds on YouTube