Book type

This article is about the book type field of a DVD. For the book publishing software, see Booktype.

The book type is a field of four bits at the start of every DVD (in the physical format information section of the control data block) that indicates what the physical format of the disc is. Many devices will use this field to determine how the disc should be treated.

One common cause of compatibility problems is the failure of a device to recognize the book type of the disc, most likely because the device had been manufactured before that particular book type was defined; for example, most DVD playback devices made before mid-2004 cannot recognize the relatively new DVD+R DL Book Type. For DVD+R, DVD+RW, and DVD+R DL discs, it is possible to change the book type field value to the value associated with the DVD-ROM format (or in some rare and unorthodox cases, even the value associated with the DVD-R format—though only DVD+R can be changed to this) in order to fool older devices, which is a trick known as bitsetting.

These are the possible values of the Book Type Field:

Value Meaning
0000 DVD-ROM, either one or two layers
0001 DVD-RAM
0010 DVD-R or DVD-R DL, depending on the Part Version field
0011 DVD-RW
1001 DVD+RW
1010 DVD+R
1101 DVD+RW DL (never released)
1110 DVD+R DL

See also

References