Angellala Rail Bridge
Angellala Rail Bridge is a heritage-listed railway bridge on the Roma-Cunnamulla railway line over Angellala Creek in Sommariva in the Shire of Murweh, Queensland, Australia. It was designed by Henry Charles Stanley and built from c. 1885 to 1994. It was added to the Queensland Heritage Register on 21 October 1992.[1] HistoryPlans for the crossing of Angellala Creek at 66 kilometres (41 mi) east of Charleville were prepared in 1885 with the construction of the western railway extension from Roma to Charleville. Part of the Western Railway Act assented to on 25 September 1875 was repealed by the Railway Reserves Amendment Act of 1879, and the money in the Western Railway Account and all funds from land alienation were paid into Consolidated Revenue of Queensland. Construction west from Roma proceeded through the 1880s and there were approaches to build a land grant railway, into western New South Wales and to Adelaide through the south-west by several syndicates.[1] However the Queensland Government undertook construction further west. The railway opened to East Mitchell in 1883, and after completion of the Maranoa River Bridge on 17 January 1885 into Mitchell itself. Further extensions took place to Dulbydilla on 24 August 1885, Morven on 1 March 1887 and opening through to Charleville on 1 March 1888.[1] Angellala railway station (26°24′47″S 146°53′12″E / 26.41306°S 146.88667°E) was named after the nearby creek. It opened as a station from 2 May 1910, and was also worked as a crossing loop. From 1929 until 1932 the station was worked unattended; however a station mistress was appointed from 1932 date until 1971. Angellala was a watering stop for locomotives, with the water tank situated at the Charleville end of the yard, and the hydrant at the Roma end.[1] The crossing of Angellala Creek posed several design problems for the bridge designers, as it was situated in a shallow valley and extensive flood plain. The bridge across the western crossing features the longest timber trestle approach on a rail bridge in Queensland. Overall length of the structure is 2,080 feet (630 m). The main crossing of the creek features 7 x 36 feet (11 m) steel spans. The approach from the west is over 1,740 feet (530 m). It was designed in 1885 when Henry Charles Stanley was Chief Engineer.[1] Plans were prepared for the strengthening of the bridge for heavier C17 class locomotives in 1946 when the spans were halved by installation of intermediate columns. With upgrading for main line (90 long tons (91 t)) diesel-electric's to be used west of Roma, the main spans were strengthened with additional steel pillars in 1994.[1] The Angellala bridge is the sixth longest in Queensland. At 530 metres (1,740 ft), the western approach is the longest approach of any railway bridge in Queensland. The riveted and gusseted half-through continuous plate girder spans are the second oldest of their type in Queensland.[1] DescriptionThe Angellala Creek Bridge and approaches located at 442 miles 42 chains (712.2 km) from Roma Street and consists of:[1]
The bridge features a maximum span of 20 feet (6.1 m) and is aligned on a straight track with the approaches being on a forty-chain curve. The abutments, piers and main spans of the bridge are original; however the approaches to the bridge have been reconstructed, and in 1994 intermediate supports allowing larger diesel-electric locomotives to operate between Roma and Charleville were incorporated into the structure.[1] Heritage listingAngellala Rail Bridge was listed on the Queensland Heritage Register on 21 October 1992 having satisfied the following criteria.[1] The place is important in demonstrating the evolution or pattern of Queensland's history. The Angellala Creek Bridge is important in demonstrating the pattern of Queensland's history in particular the development of the railway network in Western Queensland.[1] The place demonstrates rare, uncommon or endangered aspects of Queensland's cultural heritage. The riveted gusseted half through continuous plate girder spans are the second oldest of their type in Queensland.[1] The place is important because of its aesthetic significance. The bridge is close to the Warrego highway and is and important landmark in the area being a feature of the western approach to Angellala.[1] The place has a strong or special association with a particular community or cultural group for social, cultural or spiritual reasons. The bridge is close to the Warrego Highway and is and important landmark in the area being a feature of the western approach to Angellala.[1] The place has a special association with the life or work of a particular person, group or organisation of importance in Queensland's history. The bridge is important for its association with the life and work of its designer Henry C Stanley, Chief Engineer for Railways.[1] ReferencesAttributionThis Wikipedia article was originally based on "The Queensland heritage register" published by the State of Queensland under CC-BY 3.0 AU licence (accessed on 7 July 2014, archived on 8 October 2014). The geo-coordinates were originally computed from the "Queensland heritage register boundaries" published by the State of Queensland under CC-BY 3.0 AU licence (accessed on 5 September 2014, archived on 15 October 2014). External linksMedia related to Angellala Rail Bridge at Wikimedia Commons |