This article's lead sectionmay be too short to adequately summarize the key points. Please consider expanding the lead to provide an accessible overview of all important aspects of the article.(September 2010)
After the close of World War I, the US Army wanted to incorporate the lessons learned from other railway gun mounts and fulfill coastal artillery requirements for hitting a moving target. An effort to design a more universal mount for the Navy's Mk. IV 14"/50 caliber gun was undertaken.[citation needed]
The primary difference from the earlier Navy versions lies in the M1920 carriage, which could be raised and lowered. Prepositioned fixed mounts were installed at the forts, and the gun's rail trucks could be taken out from under the frame. After the removal of the rail trucks, the gun was lowered and bolted onto a pivot point for rapid 360 degree movement, necessary for tracking ships in coast defense. The M1920 carriage made the gun much more flexible. It allowed for the standard practice of using a curved piece of rail to traverse the gun, and it enabled the gun to be used in a fixed position.[1]
Two guns were deployed to Fort MacArthur in the Harbor Defenses of Los Angeles, with firing platforms at Fort MacArthur and Long Beach. The remaining two guns were deployed to Fort Grant and Fort Randolph in the Panama Canal Zone. The two guns deployed to the Panama Canal Zone could be moved to either coast on the Panama Canal Railway. After World War Two ended, the threat of a massive war was over and the United States scrapped these weapons as well.[2]
Models
The Mk.IV gun was manufactured in two models:
M1920MI centerline of breechblock mechanism canted 16 degrees counterclockwise to fit recoil band
M1920MII breech mechanism is set straight in relation to axis of tube.
Sighting and fire control equipment
The following sighting equipment was used with the gun:
bore sight
firing tables- 14-m-1, 14-e-3, 14-g-2.
M1 fire adjustment board
M1 generating unit (mounted on the forward railway truck)