Analysis of MSL TG-13 method by performing calibration of a 0.6% class-ranged 4,000 kPa pressure gauge had been conducted. The calibration was done by using a 0.1% class-ranged 40 bar test gauge as a standard. The purpose of the analysis was to verify the MSL TG-13 method with the widely used standard method Deutscher Kalibrierdienst (DKD-R 6-1). Parameters for the analysis were Error number (En) for the degree of equivalence of both methods, maximum error value according to the requirement in reference document BS en 837-1:1988 for each accuracy class. The result showed that MSL TG-13 method was consistent and complying with the widely used standard methods DKD-R 6-1, proven by En values ≤ 1 in each pressure point. The maximum error of pressure gauge, by using both methods, also complied with the requirement stated in BS En 837-1:1998, which was less than ± 0.6%. Therefore, MSL TG-13 method had been analyzed and could be implemented for pressure gauge calibration.
| Published by | Badan Standardisasi Nasional |
| Journal Name | Instrumentasi |
| Contact Phone | +6221-7560533 |
| Contact Name | Muhammad Haekal Habibie |
| Contact Email | haekal@bsn.go.id |
| Location | Kota adm. jakarta pusat, Dki jakarta INDONESIA |
| Website | ji| http://jurnalinstrumentasi.bsn.go.id| |
| ISSN | ISSN : 01259202, EISSN : 24601462, DOI : 10.14203, |
| Core Subject | Science, Engineering, |
| Meta Subject | Control & Systems Engineering, Electrical & Electronics Engineering, Engineering, Physics, |
| Meta Desc | Instrumentasi is a scientific journal with high standard of papers that issued biannually by the National Standardization Agency (BSN). In its first years, Instrumentasi was categorized as a scientific publication in the field of measuring techniques and measuring instruments which has been rapidly improved towards modern technology, and consequently, upgraded to a unique scientific journal in its class. Further, it is also accredited by the Ministry of Research, Technology and Higher Education of Republic of Indonesia (Kementerian Ristek Dikti). The scientific areas covered by Instrumentasi are those backboned by scientific measurements and thus range from instrument engineering, metrology, testing, and control. All papers submitted are refereed by bona fide reviewers from leading research institutions as well as universities prior to publication to keep their quality meet the standard of the journal. The review is carried out mainly on the basis of originality, novelty, and contribution to scientific measurement. Authors need to complete the ethical clearance form for publication. Papers may be submitted in either Indonesian or English. Titles, abstracts, and keywords, however, must be written in both languages for the purpose of indexing internationally. Papers written in English will be prioritized for publication when available space is limited. |
| Penulis | Ega, Adindra Vickar , Samodro, R. Rudi Anggoro |
| Publisher Article | LIPI Press, Anggota IKAPI |
| Subtitle Article | Instrumentasi Vol 38, No 2 (2014) |
| Scholar Google | http://scholar.google.com/scholar?q=%2Bintitle%3A&… |
| View Article | http://jurnalinstrumentasi.bsn… |
| DOI | https://doi.org/10.14203/instrument… |
| DOI Number | DOI: 10.14203/instrumentasi.v38i2.71 |
| Download Article [1] | http://jurnalinstrumentasi.bsn.go.id/ind… |
| Download Article [2] |
Informasi yang terkait dengan ANALYSIS OF MSL TG 13 PRESSURE GAUGE CALIBRATION METHOD
Statistical Analysis System Socialism: An Economic and Sociological Analysis Daily News and Analysis Foreign Policy Analysis Failure mode and effects analysis Security: A New Framework for Analysis Attributed goal-oriented requirements analysis Crowley Broadcast Analysis Goal-based Requirement Analysis Method (GBRAM) Analisis termal diferensial Analisis perilaku terapan Scenario Based Requirement Analysis Method Nanoparticle tracking analysis Analisis bahaya dan pengendalian titik kritis Analisis jalur Cornell Paper Perencanaan kelangsungan bisnis Value engineering Analisis jalur kritis